Valentine's Day Gift Eclipse 4.0 Quality Assured [YyHx4XDE]

Click here for Brochure

Vitap Eclipse 4.0 Semi Automatic Contour Edgebander

SPECIFICATIONS:

• For shaped "concave, convex" and straight panels 10-60 mm (edging) thickness 1-3 mm band thickness
• Teflon coated glue station (EVA glue) glue pot 1kg
• Quick Removal glue pot system
• Glue and tape application on big and small shaped panels
• Equipped with glue pot with 1 Kg capacity
• 2 rollers to copy the shape of the piece
• -1 tilting support roller to enable the exit of the panel after banding
• Set up of the glue temperature
• Automatic guillotine for coiled material up to 3 mm x 45 mm
• Three types of operations:
• By Encoder
• By Encoder + laser
• By Encoder to overtake the tape to cut it and to heat it
• New laser system for precision cutting to band closed pieces
• Slowing-down feeding speed by foot pedal and laser with external potentiometer and 0,37 motor
• Color Touchscreen 10”
• Trimming station with pneumatic tilting, to allow edge banding of big pieces;
• Trimming unit with 2 motors 0,5 Kw high frequency 15000 RPM with up/down and front copiers and pneumatic cylinder to lift the motors approaching the pieces to be trimmed
• 2 brazed cutters R=3, Z=6
• Raisable working table for small panels
• Holding arm with vacuum table to hold the big panels for edging and trimming
• Dimensions: 2000 x 2000 x 1700 mm • Kg 600
• Reinforced support arm

ELECTRICAL DATA:

• E-Stop on main control panel
• Service, 230 V – 3 Ph – 60 Hz
  

INCLUDED FEATURES:

109462     Glue feeder with laser sensor (EVA or PUR glue)

112671     Manual end-cutter

112712     Manual system for glue scraping

109473     Wide shoulder roller to ensure better adherence

109474     Additional lower roller with support to ensure better adherence

109475     Rectangular worktop for executing of big panels 800x360x20 mm

109478     Round worktop 125 mm diameter

 *All Min and Max radius are affected by the tape thickness, quality and adhesive used.

MACHINE FEATURES

Large Touch screen controller 10” + job list. 

Vacuum is provided via a rotating vacuum table ø 200 mm.

Laser: Measurement to assist encoder for more accurate joint of the tape.

Reinforced joint arm and heavy duty frame construction.

Slow down feeding speed for complex panel. Laser for automatic + variable  speed adjustment by potentiometer.

Trimming station with pneumatic tilting for execution of big pieces.

Glue pot teflon coated 1 Kg.

Holder for edgebanding complete with three feet.

Trimming unit with pneumatic opening of the trim motors to facilitate the introduction of the panel. Motor:

• 2 x 0,5 Kw, (0,75 Hp) Speed 15.000 rpm.
• Large Touch screen controller 10” + job list. 

 Vacuum is provided via a rotating vacuum table ø 200 mm.

 Laser: Measurement to assist encoder for more accurate joint of the tape.

 Reinforced joint arm and heavy duty frame construction.

 Slow down feeding speed for complex panel. Laser for automatic + variable

speed adjustment by potentiometer.

 Trimming station with pneumatic tilting for execution of big pieces.

 Glue pot teflon coated 1 Kg.

 Holder for edgebanding complete with three feet.

Trimming unit with pneumatic opening of the trim motors to facilitate the introduction of the panel. Motor:

• 2 x 0,5 Kw, (0,75 Hp) Speed 15.000 rpm.