Final Markdown Hydraulic Chuck Reducer Sleeves 3/4" - 1 1/4" (inch With Metric Bores) Device [bzD3lVWH]

#34OD3mmID19685

Kennametal™ Hydraulic Reduction Sleeves are designed for high-precision clamping of straight cylindrical cutting tool shanks. The self-sealing design enables efficient use of through-coolant cutting tools when the cutting tool shank completely engages the full gripping length of the sleeve.

Designed for Precision, Stability, and Efficiency

• Accelerated feed rates offer increased productivity
• Four-wall pocket provides insert stability
• One-piece design with slot configuration to seal coolant
• Through coolant standard for improved tool life, hole finish, and chip removal
• Cutting tool must be cylindrical and have a through hole when using coolant

Technical Data

• Units Supported: Inch with Metric Bores
• Adapter Style: Straight Shank
• Sleeve Series: HC750
• Shank Outer Diameter: 0.750"
• Shank Inner Diameter (Inch): 0.1181"
• Shank Inner Diameter (Metric): 3.000mm
• Shank Length: 1.9685"
• Gage Length: 0.1569"
• Overall Length: 2.126"
• Through Coolant: Yes

Country of Origin is subject to change.

Safety data sheets upon request.

#34OD4mmID19685

Kennametal™ Hydraulic Reduction Sleeves are designed for high-precision clamping of straight cylindrical cutting tool shanks. The self-sealing design enables efficient use of through-coolant cutting tools when the cutting tool shank completely engages the full gripping length of the sleeve.

Designed for Precision, Stability, and Efficiency

• Accelerated feed rates offer increased productivity
• Four-wall pocket provides insert stability
• One-piece design with slot configuration to seal coolant
• Through coolant standard for improved tool life, hole finish, and chip removal
• Cutting tool must be cylindrical and have a through hole when using coolant

Technical Data

• Units Supported: Inch with Metric Bores
• Adapter Style: Straight Shank
• Sleeve Series: HC750
• Shank Outer Diameter: 0.750"
• Shank Inner Diameter (Inch): 0.1575"
• Shank Inner Diameter (Metric): 4.000mm
• Shank Length: 1.9685"
• Gage Length: 0.1569"
• Overall Length: 2.126"
• Through Coolant: Yes

Country of Origin is subject to change.

Safety data sheets upon request.

#34OD5mmID19685

Kennametal™ Hydraulic Reduction Sleeves are designed for high-precision clamping of straight cylindrical cutting tool shanks. The self-sealing design enables efficient use of through-coolant cutting tools when the cutting tool shank completely engages the full gripping length of the sleeve.

Designed for Precision, Stability, and Efficiency

• Accelerated feed rates offer increased productivity
• Four-wall pocket provides insert stability
• One-piece design with slot configuration to seal coolant
• Through coolant standard for improved tool life, hole finish, and chip removal
• Cutting tool must be cylindrical and have a through hole when using coolant

Technical Data

• Units Supported: Inch with Metric Bores
• Adapter Style: Straight Shank
• Sleeve Series: HC750
• Shank Outer Diameter: 0.750"
• Shank Inner Diameter (Inch): 0.1969"
• Shank Inner Diameter (Metric): 5.000mm
• Shank Length: 1.9685"
• Gage Length: 0.1569"
• Overall Length: 2.126"
• Through Coolant: Yes

Country of Origin is subject to change.

Safety data sheets upon request.

#34OD6mmID19685

Kennametal™ Hydraulic Reduction Sleeves are designed for high-precision clamping of straight cylindrical cutting tool shanks. The self-sealing design enables efficient use of through-coolant cutting tools when the cutting tool shank completely engages the full gripping length of the sleeve.

Designed for Precision, Stability, and Efficiency

• Accelerated feed rates offer increased productivity
• Four-wall pocket provides insert stability
• One-piece design with slot configuration to seal coolant
• Through coolant standard for improved tool life, hole finish, and chip removal
• Cutting tool must be cylindrical and have a through hole when using coolant

Technical Data

• Units Supported: Inch with Metric Bores
• Adapter Style: Straight Shank
• Sleeve Series: HC750
• Shank Outer Diameter: 0.750"
• Shank Inner Diameter (Inch): 0.2362"
• Shank Inner Diameter (Metric): 6.000mm
• Shank Length: 1.9685"
• Gage Length: 0.1569"
• Overall Length: 2.126"
• Through Coolant: Yes

Country of Origin is subject to change.

Safety data sheets upon request.

#34OD8mmID19685

Kennametal™ Hydraulic Reduction Sleeves are designed for high-precision clamping of straight cylindrical cutting tool shanks. The self-sealing design enables efficient use of through-coolant cutting tools when the cutting tool shank completely engages the full gripping length of the sleeve.

Designed for Precision, Stability, and Efficiency

• Accelerated feed rates offer increased productivity
• Four-wall pocket provides insert stability
• One-piece design with slot configuration to seal coolant
• Through coolant standard for improved tool life, hole finish, and chip removal
• Cutting tool must be cylindrical and have a through hole when using coolant

Technical Data

• Units Supported: Inch with Metric Bores
• Adapter Style: Straight Shank
• Sleeve Series: HC750
• Shank Outer Diameter: 0.750"
• Shank Inner Diameter (Inch): 0.315"
• Shank Inner Diameter (Metric): 8.000mm
• Shank Length: 1.9685"
• Gage Length: 0.1569"
• Overall Length: 2.126"
• Through Coolant: Yes

Country of Origin is subject to change.

Safety data sheets upon request.

#34OD10mmID19685

Kennametal™ Hydraulic Reduction Sleeves are designed for high-precision clamping of straight cylindrical cutting tool shanks. The self-sealing design enables efficient use of through-coolant cutting tools when the cutting tool shank completely engages the full gripping length of the sleeve.

Designed for Precision, Stability, and Efficiency

• Accelerated feed rates offer increased productivity
• Four-wall pocket provides insert stability
• One-piece design with slot configuration to seal coolant
• Through coolant standard for improved tool life, hole finish, and chip removal
• Cutting tool must be cylindrical and have a through hole when using coolant

Technical Data

• Units Supported: Inch with Metric Bores
• Adapter Style: Straight Shank
• Sleeve Series: HC750
• Shank Outer Diameter: 0.750"
• Shank Inner Diameter (Inch): 0.3937"
• Shank Inner Diameter (Metric): 10.000mm
• Shank Length: 1.9685"
• Gage Length: 0.1569"
• Overall Length: 2.126"
• Through Coolant: Yes

Country of Origin is subject to change.

Safety data sheets upon request.

#34OD12mmID19685

Kennametal™ Hydraulic Reduction Sleeves are designed for high-precision clamping of straight cylindrical cutting tool shanks. The self-sealing design enables efficient use of through-coolant cutting tools when the cutting tool shank completely engages the full gripping length of the sleeve.

Designed for Precision, Stability, and Efficiency

• Accelerated feed rates offer increased productivity
• Four-wall pocket provides insert stability
• One-piece design with slot configuration to seal coolant
• Through coolant standard for improved tool life, hole finish, and chip removal
• Cutting tool must be cylindrical and have a through hole when using coolant

Technical Data

• Units Supported: Inch with Metric Bores
• Adapter Style: Straight Shank
• Sleeve Series: HC750
• Shank Outer Diameter: 0.750"
• Shank Inner Diameter (Inch): 0.4724"
• Shank Inner Diameter (Metric): 12.000mm
• Shank Length: 1.9685"
• Gage Length: 0.1569"
• Overall Length: 2.126"
• Through Coolant: Yes

Country of Origin is subject to change.

Safety data sheets upon request.

#34OD14mmID19685

Kennametal™ Hydraulic Reduction Sleeves are designed for high-precision clamping of straight cylindrical cutting tool shanks. The self-sealing design enables efficient use of through-coolant cutting tools when the cutting tool shank completely engages the full gripping length of the sleeve.

Designed for Precision, Stability, and Efficiency

• Accelerated feed rates offer increased productivity
• Four-wall pocket provides insert stability
• One-piece design with slot configuration to seal coolant
• Through coolant standard for improved tool life, hole finish, and chip removal
• Cutting tool must be cylindrical and have a through hole when using coolant

Technical Data

• Units Supported: Inch with Metric Bores
• Adapter Style: Straight Shank
• Sleeve Series: HC750
• Shank Outer Diameter: 0.750"
• Shank Inner Diameter (Inch): 0.5512"
• Shank Inner Diameter (Metric): 14.000mm
• Shank Length: 1.9685"
• Gage Length: 0.1569"
• Overall Length: 2.126"
• Through Coolant: Yes

Country of Origin is subject to change.

Safety data sheets upon request.

#34OD16mmID19685

Kennametal™ Hydraulic Reduction Sleeves are designed for high-precision clamping of straight cylindrical cutting tool shanks. The self-sealing design enables efficient use of through-coolant cutting tools when the cutting tool shank completely engages the full gripping length of the sleeve.

Designed for Precision, Stability, and Efficiency

• Accelerated feed rates offer increased productivity
• Four-wall pocket provides insert stability
• One-piece design with slot configuration to seal coolant
• Through coolant standard for improved tool life, hole finish, and chip removal
• Cutting tool must be cylindrical and have a through hole when using coolant

Technical Data

• Units Supported: Inch with Metric Bores
• Adapter Style: Straight Shank
• Sleeve Series: HC750
• Shank Outer Diameter: 0.750"
• Shank Inner Diameter (Inch): 0.6299"
• Shank Inner Diameter (Metric): 16.000mm
• Shank Length: 1.9685"
• Gage Length: 0.1569"
• Overall Length: 2.126"
• Through Coolant: Yes

Country of Origin is subject to change.

Safety data sheets upon request.

#114OD18mmID23622

Kennametal™ Hydraulic Reduction Sleeves are designed for high-precision clamping of straight cylindrical cutting tool shanks. The self-sealing design enables efficient use of through-coolant cutting tools when the cutting tool shank completely engages the full gripping length of the sleeve.

Designed for Precision, Stability, and Efficiency

• Accelerated feed rates offer increased productivity
• Four-wall pocket provides insert stability
• One-piece design with slot configuration to seal coolant
• Through coolant standard for improved tool life, hole finish, and chip removal
• Cutting tool must be cylindrical and have a through hole when using coolant

Technical Data

• Units Supported: Inch with Metric Bores
• Adapter Style: Straight Shank
• Sleeve Series: HC1250
• Shank Outer Diameter: 1.250"
• Shank Inner Diameter (Inch): 0.7087"
• Shank Inner Diameter (Metric): 18.000mm
• Shank Length: 2.3622"
• Gage Length: 0.1575"
• Overall Length: 2.5197"
• Through Coolant: Yes

Country of Origin is subject to change.

Safety data sheets upon request.

#114OD20mmID23622

Kennametal™ Hydraulic Reduction Sleeves are designed for high-precision clamping of straight cylindrical cutting tool shanks. The self-sealing design enables efficient use of through-coolant cutting tools when the cutting tool shank completely engages the full gripping length of the sleeve.

Designed for Precision, Stability, and Efficiency

• Accelerated feed rates offer increased productivity
• Four-wall pocket provides insert stability
• One-piece design with slot configuration to seal coolant
• Through coolant standard for improved tool life, hole finish, and chip removal
• Cutting tool must be cylindrical and have a through hole when using coolant

Technical Data

• Units Supported: Inch with Metric Bores
• Adapter Style: Straight Shank
• Sleeve Series: HC1250
• Shank Outer Diameter: 1.250"
• Shank Inner Diameter (Inch): 0.7874"
• Shank Inner Diameter (Metric): 20.000mm
• Shank Length: 2.3622"
• Gage Length: 0.1575"
• Overall Length: 2.5197"
• Through Coolant: Yes

Country of Origin is subject to change.

Safety data sheets upon request.

#114OD25mmID23622

Kennametal™ Hydraulic Reduction Sleeves are designed for high-precision clamping of straight cylindrical cutting tool shanks. The self-sealing design enables efficient use of through-coolant cutting tools when the cutting tool shank completely engages the full gripping length of the sleeve.

Designed for Precision, Stability, and Efficiency

• Accelerated feed rates offer increased productivity
• Four-wall pocket provides insert stability
• One-piece design with slot configuration to seal coolant
• Through coolant standard for improved tool life, hole finish, and chip removal
• Cutting tool must be cylindrical and have a through hole when using coolant

Technical Data

• Units Supported: Inch with Metric Bores
• Adapter Style: Straight Shank
• Sleeve Series: HC1250
• Shank Outer Diameter: 1.250"
• Shank Inner Diameter (Inch): 0.9843"
• Shank Inner Diameter (Metric): 25.000mm
• Shank Length: 2.3622"
• Gage Length: 0.1575"
• Overall Length: 2.5197"
• Through Coolant: Yes

Country of Origin is subject to change.

Safety data sheets upon request.