Ready To Ship Stainless Steel 316l Filamet™ Print And Sinter Kit Now 95% Cheaper [d4faTwIk]

This item ships directly from The Virtual Foundry and may ship separately from the rest of your order. Separate shipping charges may occur.

The Ready To Ship Stainless Steel 316l Filamet™ Print And Sinter Kit Now 95% Cheaper [d4faTwIk] is designed for quick metal printing success.

What’s Included: 0.5kg spool of Stainless Steel 316L Filamet™, 300mL Alumina, 1kg Steel Blend, 0.5kg Sintering Carbon.

Specs: The 0.5kg Stainless Steel 316L Filamet™ included in this kit contains 80.0% - 85.0% metal and has a density of 3.5g/cc.

High Compatibility: This Filamet™ enables any open-architecture Fused Filament Fabrication 3D printer to produce metal objects. Even works in 3D printing pens!

Easy to Print: All you need is an open architecture 3D printer, a 0.6mm hardened steel nozzle, and a model to print. Print like regular PLA. Place your spool so that the filament coming off is going straight into the extruder. The flow rate in your slicer may need to be adjusted up to 135%. Little to no warping occurs during printing.

Advanced Properties: Filamet™ is less hygroscopic than regular PLA. Filament dryers have adverse effects on Filamet™. Spools should not be dried.

Fully Sinterable Metal Filament: Once fired in a sintering furnace, the result is 100% metal. Instructions for sintering this product.

Special Qualities: Low carbon.

Used For: Partner Innovators have used this filament for aerospace and automotive research.

Crucible Specs: Alumina: 93mm D x 93mm H / Graphite: outside: 127mm D x 145mm H / inside: 127mm H x 102mm D

Eliminate tooling and machining costs for short run manufacturing, prototyping, and one-off metal part needs.

Note: All sales final except in cases of defective product.