Essential Tensorgrip P308 Adhesive Bundle [nPTOJR4i]

Essential Tensorgrip P308 Adhesive Bundle [nPTOJR4i] is a multi-purpose contact adhesive that effectively bonds a vast range of substrates while maintaining compliance with stringent California VOC requirements (SCAQMD Rule 1168). Formulated with CO-REZ Technology, which is an exceptional formulation incorporating a highly engineered resin and gas matrix. The result: Greater Coverage from Less Canister Weight.

!! This item can only ship via Fedex !!

Directions for Use

• TensorGrip P308 is designed as a portable, self contained spray system for field or shop applications.
• Apply adhesive to both surfaces to be mated, at 80% to100% coverage.
• Allow enough time (2-4 minutes or until dry to the touch)for the adhesive to become tacky before bonding.
• Parts should be mated with as much pressure as practical.
• Normal coverage required with web spray pattern is approximately 80%; however, porous surfaces may need a second coat.
• Initial bond is strong enough to allow cutting or trimming immediately, although ultimate strength is achieved in 1-3days.
• Canister system will spray adequately above 60º F.
• Canister system should be kept in warm area. In the event that the canister gets abnormally chilled, freezes or gives poor or sputtering spray, it should be warmed up before continued usage. Warming canister by immersion in warm water is recommended.
• Notice!!! Do not store at temperatures over 120º F

Canister Storage/Change Over

• If you choose to leave the hose and spray gun on the canister, leave the canister valve in the open position.
• Do not disconnect the hose/gun from the canister.
• Close and lock the spray gun.
• To change or disconnect canister:
  • Turn canister valve to the off position, spray out remaining adhesive from the hose, disconnect the hose and spray gun from the canister.
  • Reconnect the hose and spray gun to a new canister of adhesive and turn the canister valve to re-pressurize.
  • Or if you are NOT connecting to a new canister, connect hose to canister of cleaner (sold separately) and spray out until liquid is clear as the indication the hose/gun is clean.

Sold individually.

Bulk purchase discounts when buying:

• 5-9 canisters
• 10+ canisters

Key Features: Essential Tensorgrip P308 Adhesive Bundle [nPTOJR4i]

• High tack version of CA compliant contact adhesive.
• High build is effective on porous or less smooth surfaces.
• Heat resistance above 200º F.
• Aggressive High-Strength, Permanent Bond.

Specifications: Essential Tensorgrip P308 Adhesive Bundle [nPTOJR4i]