Great Deal (motor+esc+remote) Diy Electric Skateboard Longboard Kit 100a Vesc Based Speed Controller And Brushless Red Cover Motor (non-sealed Motor) And Remote For Women [lPzI6BYh]
Great Deal (motor+esc+remote) Diy Electric Skateboard Longboard Kit 100a Vesc Based Speed Controller And Brushless Red Cover Motor (non-sealed Motor) And Remote For Women [lPzI6BYh]Price includes 1pcs ESC and 1pcs motor and 1pcs Remote1. Specifications of VESC100A 100A ESC based on
Secure Shopping
100% Safe Guarantee
Free Shipping
On orders over $30
Money-Back
30-Day Guarantee
Great Deal (motor+esc+remote) Diy Electric Skateboard Longboard Kit 100a Vesc Based Speed Controller And Brushless Red Cover Motor (non-sealed Motor) And Remote For Women [lPzI6BYh]
Great Deal (motor+esc+remote) Diy Electric Skateboard Longboard Kit 100a Vesc Based Speed Controller And Brushless Red Cover Motor (non-sealed Motor) And Remote For Women [lPzI6BYh]
Price includes 1pcs ESC and 1pcs motor and 1pcs Remote
| Application | electric skateboard longboard fighting robots combat robots |
| BEC | 5V BEC |
| Lipo | 3-12Cells |
| Voltage | 8V-60V |
| Hardware version | based on 4.12 |
| Firmware version | 3.40 |
| Cont. Current | 100A |
| Burst Current | 280A |
| Capacitors | With high quality aluminum case, better heat dissipation |
| Case Size | 71.5mm(L)x45.8mm(W)x18mm(H) |
| Power wire | Silicon wire |
| Accessory | USB programming cable |
With 4.0mm golden connectors for motors, without connector for battery.
With high quality aluminum case, better heat dissipation
Dust‐proof and splash‐proof
Compatible with sensor or sensorless motor
Sensored or Sensorless operation
Great start‐up torque with sensorless motors
Soft‐switching to reduce the losses in power electronic switches
Separation of low power electronics from the high power electronics, make it more reliable.
2. Motor specifications
|
Model No. |
MTO6355-190-HA |
MTO6365-200-HA |
MTO6374-190-HA |
|
With Hall Sensor |
With Hall Sensor |
With Hall Sensor |
|
|
KV |
190 |
200 |
190 |
|
Idle Current |
1.0A |
0.8A |
0.8A |
|
Max. Current |
65A |
65A |
65A |
|
Input Volt |
2-12s Lipo |
2-12s Lipo |
2-12s Lipo |
|
Max. Output Watt |
3510W |
3520W |
3550W |
|
Max. Pull |
12000g |
9700g |
13000g |
|
Rated Current |
55A |
60A |
60A |
|
Motor Weight |
600g |
745g |
825g |
|
Shaft |
8mm |
8mm |
8mm |
|
Output shaft length |
26mm |
26mm |
26mm |
|
Resistance |
0.0441 |
0.0402 |
0.0402 |
| Model No. | MTSKR2005WF (MTSKR20WFV2) | Waterproof Rank | IP66 |
| Control Mode | New Esk8 | Application | Only for Electric skateboard, elongboard, mountainboard |
| Speed Display | Yes | Travel Mileage | Yes |
| Throttle and brake Display | ±100% | VESC Control Mode | Duty Cycle/ Current Mode |
| Speed Mode |
3 speed modes, each mode can adjust speed from 1%-100% throttle |
Accessories | Wireless charging pad; receiver; 3pcs dupont cable |
| Charger |
QC 2.0 wireless |
Wireless Frequency | 2.4GHz wireless with 40 channels |
| Display Screen |
OLED yellow & blue screen |
Triggers | 2x high senstive triggers |
| Throttle and Brake Signal Output Range |
1.5ms-2ms for throttle; 1.5ms-1ms for brake |
Telemeter Data by Receiver | Motor RPM; main battery voltage |
| Voltage Display |
Remote & main battery voltage level (lithium iron; lithium ion battery optional) |
Telemeter Data by VESC | ESC voltage/ current/ temp; Motor temp/ RPM |
| Compatible ESCs |
VESCTOOL/ Focbox/ Other PWM ESCs that has same signal output range with the remote |
Receiver Built-in Switch for Esk8 Light / Esurf Water Pump |
1x 30V 3A mechanical relay switch; 1x 20V 2A transistor electronic switch |



What Our Customers Say
Absolutely no complaints!
The best purchase I have made all year.
- Heidi X..
Absolutely no complaints!
A great item. So happy with it all.
- Jenna A..
Absolutely no complaints!
A great gadget that is well worth its money.
- Mekhi W..