Name: Vip Only Alpine Hdz-65cs Massive 95% Savings [iC5WVQjN]
Brand: technovaprecision.com
SKU: HBS6393957336
Price: 62.99 USD
Availability: InStock
Rating: 4.63 (863 reviews)

Vip Only Alpine Hdz-65cs Massive 95% Savings [iC5WVQjN]

Alpine Status high-resolution audio system

Alpine designed its Status System components for high-resolution audio playback. Their Status Series digital receiver, amp, speakers, and subs were designed to work together and play your 192kHz/24bit digital music streaming files with high-quality, studio-level purity and sonic fidelity.

Ready for high-resolution

Alpine crafted their HDZ-65CS 6-1/2" 2-way component speaker system for listeners in search of excellent audio quality in the car. Using many of the same design and material elements as their flagship F#1 Status speakers, this speaker system optimizes the woofer, tweeter, and crossover for near-perfect sound from premium sources, like high-resolution audio files.

Optimized for Alpine

These Status Series speakers make a great addition to any high-powered system, thanks to power-handling up to 100 watts RMS, but you can unlock their full potential by pairing them with Status System components, which Alpine designed with high-resolution audio in mind. Alpine uses a carbon composite cone for consistency across the speaker's ultra-wide frequency range, plus a special double gathered-edge surround, which helps minimize distortion and promote accuracy.

Alpine prioritizes tweeter fit

If you're upgrading a factory 3-way component system, Alpine optimizes fit to minimize the need for custom work. Their slim-fit 1" tweeter makes it easier to utilize the factory tweeter locations of more vehicles.

Product highlights:

2-way car speakers (pair)
6-1/2" carbon composite woofer with double-gathered edge surround
1" slim-fit tweeter
handles up to 100 watts RMS (300 watts peak power)
frequency range: 55-40,000 Hz
sensitivity: 88 dB
woofer top-mount depth: 2-11/16"
warranty: 1 year
MFR # HDZ-65CS
Item # 500HDZ65CS
California customers: Please click here for your Proposition 65 WARNING.

What's in the box:

Alpine HDZ-65CS owner's manual

Two woofers
Two woofer grilles
Two tweeters
Two flush-mount housings (with tweeters installed)
Two threaded tweeter mounting rings
Two crossovers
Four rectangular adhesive backed pads
Eight 1-1/8" Woofer mounting screws
Four 1-1/8" Crossover mounting screws
Eight speed-clips
Four flat washers
Four 5" Zip ties
Owner's manual
Warranty information
Important Notice
On-line product registration information

Features & specs

General
Speaker Size	6 1/2
Design	2-way
Tweeter Design	Cone
Impedance (Ohms)	4
Tweeter Composition	Carbon Composite
Woofer Composition	Carbon Composite
Woofer Surround	Rubber
Parts Warranty	1 Year
Labor Warranty	1 Year
Specifications
Sensitivity (1W at 1 meter)	N/A
Sensitivity at 2.83 volts	88
Frequency Response	55 - 40k Hz
Minimum RMS Wattage	---
Maximum RMS Wattage	100
Peak Power Handling (Watts)	300
Top-mount Depth (Inches)	2 11/16
Bottom-mount Depth (Inches)	N/A
Cutout Diameter or Length (inches)	5 9/16
Mounting Height (Inches)	0.35
Frame Width	6.687
Frame Length	6.687

Product Research

Features

Woofer: Alpine describes the woofer size as 6½, but because they require a larger cutout than a standard 6½ speaker, Crutchfield has traditionally referred to this size as 6¾. Please enter your vehicle information to confirm fit.

Cone Material: The same carbon composite cone material is used for both the woofers and tweeters, aiding the smooth transition between the drivers.

Phase Plug: The woofers and tweeters use an aluminum phase plug in the center of the cone to help produce a smooth, flat off-axis frequency response by preventing the high frequency sound waves from one side of the cone from interfering with sound waves from the other side of the cone.

Tweeters: The tweeters are designed to be flush mounted, with the mounting surface sandwiched between the tweeter flange and the threaded mounting ring.

Tweeter Dimensions:

	Flush Mount
Mounting Height	0.48"
Mounting Depth	0.57"
Cutout Diameter	2"
Frame Diameter	2.275"

Crossover: The passive crossovers allow some system flexibility; the tweeter output level and crossover slope are adjustable.

Tweeter Output Level: three jumper positions; choose -3 dB, 0 dB (flat), or +3 dB
Crossover Slope: two jumper positions; choose 12 dB/octave or 6 dB/octave
Wire Connections: inputs and outputs are screw terminals; accept bare wire or spade connectors up to 0.315" wide (no wire is included with the speakers)
Crossover Dimensions:
- Width: 5.32"
- Height: 1.625"
- Depth: 3.94" (plus wire)