Problem Solver Jeep Wrangler/gladiator 3.0l Ecodiesel Bypass Oil Filtration Kit Flash Sale: 45% Off [TcYbtxJz]

2020-2024 Problem Solver Jeep Wrangler/gladiator 3.0l Ecodiesel Bypass Oil Filtration Kit Flash Sale: 45% Off [TcYbtxJz]

Watch The New 3.0L Jeep Installation Video

Parts Included In This Kit

• 1 EXTREME 2 bypass oil filter housing (HX2SHBK) (HX2SHBLU) (HX2SHRED)
• 1 EXTREME 2 filter element (EX2SE) with o-rings (GX1/2)
• 2 Housing in/out fittings (AN06-04MS90)
• 1 Oil return fill cap (FLLCEDO) with o-ring (OEDO) and fitting (AN06-02MS90)
  
• 9ft of hose to be cut to your preference (LW06BK)

Pressure Port Options:

"Tee Fitting"

• 1 Tee fitting system (TM14B) with washer (D14) and fittings (AN06-02MP90 + AN06-06FJ)

"Filter Cap"

• 1 Filter cap (PCED30) with fitting (AN06-02MS90)

Mounting Options:

"Cross-Member Bracket"

• 1 Cross-Member Mount Bracket with hardware (CMB-J)

"Frame Mount Bracket"

• 1 Mounting bracket with bracket hardware (ZBRCKX12)
  
  

Important Notes and Installation Guide

• Must use the following filters with our oil pressure cap: 
  
  • Mopar Filter part #68492616AA
    K and P Filter S91
• Our filter cap w/ pressure port is compatible with ALL EcoDiesel 3.0 engines (even 2020+ models), but you must snap in a 2014-2019 stock filter with our filter cap (even for newer 2020+ models). Don't forget to place the o-ring that comes with new stock filter on our filter cap too. 
• 
  
•  Owners of 2020-Newer models now have the option to select the tee fitting pressure port, which gains access to the oil pressure supply through your vehicle's oil pressure sensor. 

• New 3.0L EcoDiesel Jeep Wrangler & Gladiator Installation Guide

• Watch the general installation video for more insight on how to complete your installation. 

Example Mounting Locations: 

Customers have submitted their own custom projects including a custom bracket for mounting our filter on the Jeep Wrangler. This bracket is not available on our site but contact us for more information on how to modify one for yourself. 

Notes:
• Our filter has two additional bolt holes on the bottom of the housing that can be used to mount our filter, as seen in the photos below. 
• Location was driver side behind wheel. 

Other Installation Photos: 

This is the new cross-member bracket. Photo shows a zinc prototype, the new bracket is powder coated black.

BENEFITS OF ULTRA-FINE OIL FILTRATION