Budget-friendly Poly 1512x Liquid Plastic 50% Off - Today Only [IXTDL5Uk]

Budget-friendly Poly 1512x Liquid Plastic 50% Off - Today Only [IXTDL5Uk] is a two-part, liquid polyurethane resin that cures (RTV) to a white, Shore D71 plastic. This product has a simple 1A:1B mix ratio by weight. When cured, it has the feel and density of hard wood or thermoplastics. Poly 1512X is a pourable plastic, but it can be easily thickened with PolyFiber II Thickener for brush-on application. For a slower-setting version, consider Poly 1512 Liquid Plastic.

WARNING: This product can expose you to chemicals including Diisononyl phthalate, Cumene, Napthalene, Ethyl benzene, Benzene and Toluene, which are known to the State of California to cause cancer and/or reproductive harm. For more information, go to www.P65Warnings.ca.gov. 

FOR INDUSTRIAL/PROFESSIONAL USE ONLY.

TECHNICAL SPECIFICATIONS

• Mix Ratio by Weight: 1A:1B
• Shore Hardness: D71
• Pot Life: 5 min.
• Demold Time: 0.5-4 hr.
• Cured Color: White
• Mixed Viscosity: 400 cP
• Specific Volume: 25.1 in³/lb
• Specific Gravity: 1.1
• Linear Shrinkage: 0.0048 in/in
• Elongation: 5.4 %
• Tensile Strength: 6,712 psi
• Elastic Modulus: 118,352 psi
• Flexural Modulus: 241,223 psi
• Flexural Strength, 5% Strain: 10,046 psi
• Heat Deflection Temp.: 142°F
• Max Exotherm: 251°F
• Note: Shake or Stir Part B before use. Demold time varies with thickness of casting. The thinner the casting, the longer the demold time. Shrinkage in polyurethane resins is caused by gelling while hot then cooling.
• Note: The color of polyurethane Part Bs may change in color from batch to batch or may darken with age, but product performance is not affected.