Seasonal Pick Pro Seal 2500 Solvent-based For Concrete - 5 Gallon Flash Sale: 95% Off [G4Nyk0fq]

Stone Edge Surfaces Pro Seal 2500 is a high-gloss, 25% solids, pure acrylic solvent-based concrete sealer with excellent penetration and adhesion qualities when used on clean and unsealed new or existing concrete. Pro Seal 2500 is UV stable, non-yellowing, and is a very tough 100% pure acrylic sealer that will give your jobs a beautiful wet look that makes the colors “pop”.

Pro Seal 2500 is NOT a cure-and-seal, so concrete must be completely dry 48 to 72 hours for thin overlays and up to 28 days for ready-mix concrete, because it does not breathe or allow out-gassing.

This concrete sealer is clear and is 700 VOC, so make sure you can use it in your state. Pro Seal 2500 comes in a 5-gallon bucket

Most Common Uses

Sealing of floors, driveways walkways and patios.

Application

Base/Coat Top Coat Gloss Sealer

Application Method: Roll on with nap roller or can be sprayed using a “Chapin” Extreme type all metal sprayer.

Working Time: Average 5 to 10 minutes

Coverage Rate

Approximately 1000 sq. ft.

Coverage rates vary depending on porosity and texture, and application method. Excessive build up should be avoided.

Technical Specifications

• Best Application Temp Range: 40°F - 85°F
• Meets USDA AASHTO-M-148 DRIED COATING criteria for a Structural Surface that may come in contact with food
• Dry Time = 1 - 2 hours
• Recoat = 2 - 24 hours
• Wheel Traffic = 24 – 48 Hours
• Foot Traffic = 4 – 6 hours
• Gloss / Sheen = High Gloss
• Solvent Resistance =Minimal
• Concrete Adhesion = Excellent
• Solids = 25%