Big Discount Eunorau E-fat-mn Electric Bike Shop Now [tGhdNuzc]

New legislation became effective in January 2016. The current regulations define an “electric bicycle” as: a bicycle equipped with fully operable pedals and an electric motor of less than 750 watts, separated into three classes:

1. A "class 1 electric bicycle,” or “low-speed pedal-assisted electric bicycle,” is a bicycle equipped with a motor that provides assistance only when the rider is pedaling, and that ceases to provide assistance when the bicycle reaches the speed of 20 miles per hour.

2. A "class 2 electric bicycle,” or “low-speed throttle-assisted electric bicycle,” is a bicycle equipped with a motor that may be used exclusively to propel the bicycle, and that is not capable of providing assistance when the bicycle reaches the speed of 20 miles per hour.

3. A "class 3 electric bicycle,” or “speed pedal-assisted electric bicycle,” is a bicycle equipped with a motor that provides assistance only when the rider is pedaling, (no throttle) and that ceases to provide assistance when the bicycle reaches the speed of 28 miles per hour and equipped with a speedometer.

Laws vary in different states/countries. Please check your local regulations. Here is a good resource of information in the US: http://peopleforbikes.org/our-work/e-bikes/policies-and-laws/

Lots of customers used a 52V battery to connect with a 48V30A controller.Then the display might shown high voltage error 07. So BAFANG has update the 48V30A controller to 52V28A, then it can compatible with both 48V and 52V batteries. For a 52V battery it will show 100% on the display when connecting to the 52V controller, but for 48V battery,it will show 84%. We're still trying to resolve this matter,it's not a big question, it won't effect any functions.

SOLUTION:

Step1. Buy a program cable from us, here's the link: https://eunorau-ebike.com/collections/bbs-ena-kit-parts/products/8fun-bafang-center-motor-middle-drive-motor-kit-bafang-usb-programmed-cable

There's a youtube video down below for how to use BBS/ENA PROGRAM CABLE: https://www.youtube.com/watch?v=QuzE9G2eyN4

Step2.Download the program software here

Step3.Follow the instruction complete program as written

4. Can I charge the bike without the battery?

Yes! You can access the charge port and the USB port on all EUNORAU bike models without removing the the battery from the bike.Also your battery can be brought inside and set to charge.

5. How long does the battery last?

Batteries typically last 5-6 years. However, this can vary depending on how much you use your e-bike. EUNORAU batteries will still deliver more than 80% of their original capacity after 500 charge cycles.

To prolong the lifetime of the battery there are several procedures that can be followed. The main ones include:

1.If storing the battery for more than 2 weeks it should be kept in a cool, dry place with a 70%-80% charge remaining in it.

2.Avoid running the battery completely flat. Charging batteries when they still have 10-15% of power remaining will significantly extend their lifetime.

6. How long does it take to charge an EUNORAU Lithium Ion Battery?