Money Saver Battery Charger Unicharger -lead-acid Batteries-12v- Previous Ducati Supplier Starter Kit [tj5oTQKO]

Battery charger Unibat Unicharger UN-1210-WR - 12v 1A

 *lead-acid batteries* 

****3 YEAR WARANATY ***

Ideal for charging all types of lead-acid batteries (gel, MF, VRLA, AGT, etc.), thanks to a nine-stage charging method. Unicharger UN-1210-WR is a completely waterproof charger. The set includes two types of cables, which allow for easy connection of each battery.

Technical parameters:

• Output: 12V 1Amp
• Power supply : from 100 V to 240 V AC 50/60 Hz
• Length of the power cable: 1.9 m
• Equipped with two types of connection cables:
  • type clamps crocodile,
  • ring terminals - used to securely screw the charger's terminals to the battery terminals,
  • Equipped with anti-jam and polarity protection
  • Fully waterproof
  • Suitable for all types of vehicles: motorcycles, scooters, ATVs, quads, caravans, boats, yachts, agricultural vehicles
  • Ideal for charging all kinds of batteries: gel , SLA, VRLA, AGM and traditional
  • Compliant with all international GS / CE security standards
  • For batteries with a capacity of up to 80 Ah (ampere hours)
  • 3 lamps showing the operating status of the charger Lamp designation:
    • Red - if lit means that the charger is properly connected to the power supply.
    • Yellow - lights when the charger is charging. The yellow light stays on until the battery is fully charged, it can take up to several days for large batteries.
    • Green - if it lights up, the charging process has ended and the charger has gone into battery backup fully charged. If the battery is partially discharged (due to external power consumption or automatic voltage drop), the charger will automatically switch back to the charging state (yellow lamp).
      
      Package contains:
      • UNICHARGER UN-1210-WR charger
      • Wall bracket
      • Two sets of 60 cm length connection cables
      • User's Manual

Hook up for Installed Battery in Vehicle:

For Negative Grounded Vehicle –

1-       Connect POSITIVE (RED) clip from the battery charger to the POSITIVE (POS P, +) underground post of the battery first.

2-      Connect the NEGATIVE (BLACK) clips to the vehicle chassis far from the battery and fuel line.

3-      Connect the Ac Supply plug of the charger to an electric outlet.  

(Safety precautions in full Operating Instructions)

For A Positive Grounded Vehicle –

1-      Connect NEGATIVE (BLACK) clip from the battery charger to the NEGATIVE (NEG, N -) underground post of the battery first.

2-      Connect the POSITIVE (Red) clips to the vehicle chassis far from the battery and fuel line.

3-      Connect the Ac Supply plug of the charger to an electric outlet.

 (Safety precautions in full Operating Instructions)

Hook up for when Battery is outside the Vehicle:

1.      First check the Polarity of the battery post. A POSITIVE (POS, +) usually has a larger diameter than a NEGATIVE (NEG, N-).

2.      Attach at least 1.8m long insulated battery output cable of the charger to NEGATIVE battery post (NEG, N-)

3.      Connect the POSITIVE (RED) charger clip to the POSITIVE post (POS, P+) of the battery

4.      Position the free end of the cable far away from the battery as possible, then connect the NEGATIVE (BLACK) charger to the free end of the cable

5.      Connect the Charger Plug to the electric Outlet.

(Safety precautions in full Operating Instructions)