Christmas Sale Ball Valves Elephant Bv3232p-fp-fb-iso-h 16 Bar, Full Bore Wafer, Stainless Steel Ss316, Ptfe, With Double-acting Pa-da Pneumatic Actuator, With Pneumatic Distributor 4v320-08 220v, With Lsu Apl-410n Ex, With Manual Override Mon Perfect For Gifting [XNquvbsl]

The ball valve is used as a shut-off valve in heat and water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve. The use of ball valves as regulating valves is not allowed.

Pneumatic double-acting rotary actuators PA-DA and pneumatic rotary actuators with return spring PA-SA are designed to automate the process of controlling industrial valves with maximum torque up to 2128 Nm.

The pneumatic valve is used to change the direction, start, stop the compressed air flow in the pneumatic system depending on the external control action.

The HDM worm gear manual doubleturn actuator with reduction gearbox allows manual setting of the required positioning of the shut-off valve by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most efficient and effective solution to the full range of manual override applications.

The limit switch unit is designed for visual and electrical signaling of the end positions of the shut-off body of the pipeline valve.

 

 

Technical parameters Elephant BV3232P-FP-Fb-ISO-H 16 bar ball valves, full bore, flanged, SS316 stainless steel, sealing - PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic valve 4V320-08 220V, with LSU APL-410N EX, with manual override MON:

Nominal diameter DN, mm	15 - 100
Nominal pressure PN, bar	16
Ambient temperature, ⁰C	from -50 to +200
Working medium	water, steam, oil products and other liquid or gaseous media neutral to the materials used
Connection to pipeline	interflange
Control type	manual (handle)
Ball passage	full bore without constriction
Complement	electric or pneumatic actuator can be installed (ISO 5211-2001)

Elephant BV3232P-FP-Fb-ISO-H 16 bar ball valves, full bore, flanged, SS316 stainless steel, sealing - PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic valve 4V320-08 220V, with LSU APL-410N EX, with manual override MON

 

 

Dimensions and dimensions Elephant BV3232P-FP-Fb-ISO-H 16 bar, full bore, flanged, SS316 stainless steel, sealing - PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic valve 4V320-08 220V, with LSU APL-410N EX, with manual override MON:

DN	d, mm	D2, mm	D1, mm	D, mm	T, mm	C, mm	L, mm	B1, mm	E, mm	C, mm	H, mm
15	15	45	65	95	14	14	42	153	72	120	77
20	20	58	75	105	16	16	48	153	72	120	77
25	25	68	85	115	16	16	50	153	72	120	77
32	32	78	100	140	16	16	60	153	72	120	77

Sketch of dimensions and dimensions Elephant BV3232P-FP-Fb-ISO-H 16 bar, full bore, flanged, SS316 stainless steel, seal - PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic valve 4V320-08 220 V, with LSU APL-410N EX, with manual override MON

 

 

Parts and materials table Elephant BV3232P-FP-Fb-ISO-H 16 bar, full bore, flanged, SS316 stainless steel, seal - PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic valve 4V320-08 220V, with LSU APL-410N EX, with manual override MON:

№	Parts	Material
1	Nut	Steel 304
2	Handle	Steel 201+PVC
3	Washer	Steel 304
4	Locking ring	Steel 304
5	Thrust washer	Steel 304
6	Gland washer	Steel 304
7	Gland	PTFE
8	Stop gasket	PTFE
9	Rod	Steel 316
10	Ball cover	Steel 316
11	Ball	Steel 316
12	Ball seal	PTFE
13	Gasket	PTFE
14	Body	Steel 316

Parts and material sketch Elephant BV3232P-FP-Fb-ISO-H 16 bar, full bore, flanged, SS316 stainless steel, seal - PTFE, with double-acting pneumatic actuator PA-DA, with pneumatic valve 4V320-08 220V, with LSU APL-410N EX, with manual override MON

 

 

Technical data of PA-DA pneumatic actuators:

№	Name	Material
1	Enclosure	extruded aluminum
2	Side plugs	cast aluminum
3	Gear	stainless steel
4	Piston	steel/aluminum
5	Plugs	stainless steel
6	Piston ring	NBR
7	Springs	spring steel
8	Piston bearing	engineering plastic
9	Piston ring	NBR
10	Plug	NBR
11	Thrust ring	engineering plastic
12	Ring	engineering plastic
13	Washer	stainless steel
14	Spring clip	stainless steel
15	Indicator	plastic
16	Indicator housing	plastic
17	Bearing	engineering plastic
18	Cam	steel
19	Bearing	NBR
20	Bearing	engineering plastic
21	Bearing	engineering plastic
22	Sealing ring	NBR
23	Sealing ring	NBR
24	Bearing	stainless steel
25	Adjustment nut	stainless steel
26	Adjustment screw	stainless steel
27	Sleeve	aluminum

Parts and material sketch of the PA-DA pneumatic actuator

 

 

Technical parameters of pneumatic valve 4V320-08 220V:

Name	meaning
Type of pneumatic valve	slide valve
Working pressure, bar	1.5 ÷ 8
Supply voltage, V	220 V
Total power, Va	4.5
Control	double-sided electromagnetic
Frequency of operation, cycle/sec	5

Pneumatic valve 4V320-08 220V

 

 

Dimensions and dimensions of pneumatic valve 4V320-08 220V:

Pneumatic valve model	4V320-08
A, mm	71.9
B, mm	45
C, mm	94.4
D, mm	27
E, mm	69
F, mm	40
I, mm	24
K, mm	40
L, mm	188.8
M, mm	69.4
N, mm	50
O, mm	82.4
P, mm	24
S, mm	20
T, mm	6.5
U, mm	2.4
V, mm	4
H, mm	82.4

Sketch of dimensions and dimensions of pneumatic valve 4V320-08 220V

 

 

Technical parameters of the handwheel MON:

Name	Value
Climatic version	U,UHL,T,OM
Degree of protection, IP	67
Connection type	ISO 5211

Manual doubler MON

 

 

Dimensions and dimensions of the handwheel MON:

Model	MON1-250-T26-ISO	MON2-450-T28-ISO	MON3-700-T38-ISO	MON4-1200-T54-ISO
b1, mm	14	17	22	27
N, mm	22	22	28	32
b2, mm	14	17	22	27
M, mm	16	18	22	30
D1, mm	Ø50	Ø70	Ø102	Ø102
4-M1, mm	4-M6	4-M8	4-M10	4-M10
D2, mm	Ø70	Ø102	Ø125	Ø125
4-M2, mm	4-M8	4-M10	4-M12	4-M12
E, mm	70x70	95x95	114x114	129x129
D3, mm	Ø50	Ø70	Ø102	Ø125
4-Ø1, mm	4-Ø6.5	4-Ø8.5	4-Ø10.5	4-Ø12.5
D4, mm	Ø70	Ø102	Ø125	Ø140
4-Ø2, mm	4-Ø8.5	4-Ø10.5	4-Ø12.5	4-Ø16.5
A, mm	90	125	140	188.5
B, mm	55	64	71	93
ØC, mm	Ø88	Ø110	Ø129	Ø174
F, mm	115	135	166	202
T, mm	44	62.5	70	94
Y, mm	145	178	212	280
H, mm	120	133	180	195
S, mm	53	56.5	68.7	84
K, mm	10	13	12.5	15
Ø hand wheel, mm	180	200	280	320

Sketch of dimensions and dimensions of the MON handwheel MON

 

 

MON handwheel materials:

№	Name	Material
1	Stem for mounting the pneumatic actuator	Steel 45
2	Sealing ring	EPDM
3	Fixing spring	Spring steel
4	Upper end cover	Aluminum alloy
5	Screw	Steel 304
6	Locking bracket (main rod)	Steel 304
7	Housing	Aluminum alloy
8	Sealing ring	EPDM
9	Gear unit	Cast iron BCh50
10	Transition coupling	Cast iron BCh40
11	Gear stem	Cast iron BCh40

Materials of the handwheel

 

 

Technical parameters of limit switch unit APL-410N EX:

Name	Value
Model of limit switch unit	APL-410N EX
Maximum voltage of limit switch, V	250
Working environment temperature, °C	-40 to +80
Service life, years	10

Limit switch unit APL-410N EX

 

 

Dimensions and dimensions of limit switch unit APL-410N EX:

Model	D, mm	D1, mm	H, mm	L, mm	B, mm	M, mm
APL-410N EX	9.5	5	174	177	178	8

Sketch of dimensions and dimensions of limit switch unit APL-410N EX

 

 

Passports and certificates

Data sheet for Elephant DA/SA double-acting pneumatic actuator with return springs