Warehouse Clearance Vanne Papillon D'eau Elephant Wbv1631n-2w-fb-h, Matériau Du Corps - Fonte Qt450, Matériau Du Disque - Acier Inoxydable Aisi 304, Joint - Nbr, Actionneur Pneumatique Pa-da-105-1 Double Action, 4m310-08 24v, Bkv Apl-210n Bpv Afc2000 With A 50% Price Cut [JUEuFjeW]

Butterfly valves are designed for use as shut-off or regulating valves for controlling flows in heat supply systems, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries. The valves are opened and closed by turning the disk by 90°. Opening is performed by turning the handle counterclockwise, closing - clockwise.

Pneumatic rotary actuator is designed to automate the process of control of industrial valves, as well as to determine the position of the valve shut-off body.

Pneumatic valves are used for control in pneumatic systems with NAMUR docking surface, for installation of valves through through holes in the body. Electromagnetic control, is realized by means of voltage coils 12-AC, 12-DC, 24-AC, 24-DC, 110-AC, 220-AC. Depending on the model, the valves have one-way or two-way control. Solenoid operated pneumatic valves have a wide range of models and include common switching types for three (3/2) and five (5/2 and 5/3) line pneumatic valves. They are designed for use with quarter-turn pneumatic actuators.

The limit switch unit is designed for visual and electrical signaling of end positions of the valve shut-off body: valve, tap or disk gate. It is mounted on top of the pneumatic actuator surface and connected to the actuator shaft in DIN standard. The sealed box usually contains two sensors, which monitor the position of the actuator shaft and signalize in extreme positions. OMRON microswitches, inductive sensors or reed switches are used as sensors. The visual indication of the position can be observed on the housing of the unit there is a 3D visual indicator RED-CLOSED and GREEN-OPEN.

The air treatment unit is designed to clean compressed air from moisture droplets and solid particles, remove condensate, automatically maintain the pressure at the preset level, supply lubricant from the tank in the compressed air flow to the elements of the pneumatic system.

 

 

Technical parameters of Water Butterfly Valve Elephant WBV1631N-2W-Fb-H, body material - cast iron QT450, disk material - Stainless steel AISI 304, seal - NBR, pneumatic actuator PA-DA-105-1 double action, 4M310-08 24V, LSU APL-210N, ATU AFC2000:

Butterfly valves WBV1631N-2W-Fb-H, body material - cast iron QT450, disk material - Stainless steel AISI 304, seal - NBR, pneumatic actuator PA-DA-105-1 double action, 4M310-08 24V, LSU APL-210N, ATU AFC2000

 

 

Dimensions and dimensions of butterfly valves Elephant WBV1631N-2W-Fb-H, body material - cast iron QT450, disk material - Stainless steel AISI 304, seal - NBR, pneumatic actuator PA-DA-105-1 double action, 4M310-08 24V, LSU APL-210N, ATU AFC2000:

DN	H, mm	A, mm	E, mm	I, mm	B, mm	C, mm
125	317.5	495	200	162	88	139
150	354.5	495	200	162	88	139

Sketch Butterfly valves WBV1631N-2W-Fb-H, body material - cast iron QT450, disk material - Stainless steel AISI 304, seal - NBR, pneumatic actuator PA-DA-105-1 double action, 4M310-08 24V, LSU APL-210N, ATU AFC2000

 

 

Materials of butterfly valves Elephant WBV1631N-2W-Fb-H, body material - cast iron QT450, disk material - Stainless steel AISI 304, seal - NBR, pneumatic actuator PA-DA-105-1 double action, 4M310-08 24V, LSU APL-210N, ATU AFC2000:

Sketch of parts and materials Butterfly valves WBV1631N-2W-Fb-H, body material - cast iron QT450, disk material - Stainless steel AISI 304, seal - NBR, pneumatic actuator PA-DA-105-1 double action, 4M310-08 24V, LSU APL-210N, ATU AFC2000

 

 

Technical parameters of pneumatic actuator PA-DA-105-1:

Pneumatic actuator PA-DA-105-1

 

 

Dimensions and dimensions of the pneumatic actuator PA-DA-105-1:

Sketch of dimensions and dimensions of pneumatic actuator PA-DA-105-1

 

 

PA-DA-105-1 air actuator parts and materials table:

Parts and material sketch of the PA-DA-105-1 pneumatic actuator

 

 

Technical characteristics of the pneumatic valve 4m310-08 24V:

Design	spool type
Nominal pressure PN, MPa (kg/cm2)	1,2 (12)
Working pressure, bar	1,5...8
Working medium	filtered compressed air
Ambient temperature t, ⁰C	+5 to +50
Response frequency	5 cycles/s
Manual duplication	is
Degree of protection	IP 65
Mounting	through holes in the housing
Enclosure material	anodized aluminum
Response time	0.05 sec.

Pneumatic valves 4M310-08 24V

 

 

Dimensions and dimensions of pneumatic valve 4M310-08 24V:

Pneumatic valve model	4M310-08
D, mm	32
E, mm	69
F, mm	40
I, mm	45
K, mm	40
L, mm	134.5
M, mm	40
N, mm	24
S, mm	27
U, mm	2.4
H, mm	17.5

Sketch of dimensions and dimensions of pneumatic valve 4M310-08 24V

 

 

Technical parameters of limit switch unit APL-210N:

Name	Value
Model of limit switch unit	APL-210N
Maximum voltage of limit switch, V	250
Working environment temperature, °C	-40 to +80
Service life, years	10

Limit switch unit APL-210N

 

Dimensions and dimensions of the APL-210N limit switch unit:

Model	H, mm	L, mm	B, mm	D, mm	D1, mm	M
APL-210N	77	112	88	10	5	20x1.5

Sketch of dimensions and dimensions of limit switch unit APL-210N

 

 

Main parameters of the AFC2000 air treatment unit:

Operating pressure, bar	8
Maximum pressure, bar	10
Adjustable pressure range, bar	0,5 ÷ 9
Breaking pressure, bar	15
Air connection	1/4”
Operating temperature, C	-5 to +60
Filter particle size, µm	40
Oil viscosity	ISO VG 32
Weight, kg	0,395
Set composition	filter-moisture separator, pressure regulator, lubricator, bracket

Air treatment unit AFC2000

 

 

Overall and installation dimensions of AFC2000 air treatment units:

A, mm	162
B, mm	88
C, mm	139
D, mm	31
E, mm	53.5
F, mm	12
G, mm	8
H, mm	7
I, mm	13.3
J, mm	39
K, mm	5
L, mm	40
M, mm	32
N, mm	53
O, mm	29
P, mm	6
R, mm	41.5