4K 60Hz Compact HDMI® Extender over Fiber 300m

The HE01FE-4K6G is an HDMI® over fiber optic extender with an LC connector to transmit uncompressed 4K60Hz HDMI® signals. It supports EDID and HDCP pass-through over multi-mode fibers. Its small, compact size and pigtail design allow for easier installation in any AV application.

Dongle-Type/Pigtail 4K60Hz Fiber Optic HDMI® Extender 300M

Optical fiber is one of the most advanced technologies for signal transmission. The HE01FE-4K6G uses a multi-mode fiber optic cable to carry a 4K60Hz HDMI signal over distances of up to 300m. The dongle-type/pigtail design ensures easy installation.

Compact Size

The HE01FE-4K6G 4K HDMI fiber extender measures just 62.2 × 25 × 12 mm and features a 190 mm HDMI pigtail for flexible installation.

Built-in LC Fiber Connector

The LC connector is pre-installed, requiring only an LC multi-mode fiber cable to connect the transmitter and receiver.

Power Only on the Receiver Side

Generally, the transmitter does not need an additional power source. However, if operating near the maximum range (300m), connecting a USB-C power source to the transmitter can help amplify the audio-visual signal.

Low Latency

Low latency is crucial for event system planning. According to SC&T tests, the HE01FE-4K6G has a latency of less than one frame over distances of up to 300 meters.

LED Indication

The LED indicator clearly shows the transmission status, allowing for quick and easy troubleshooting.

Plug and Play

The HE01FE-4K6G requires no drivers. Simply plug in the HDMI cable, LC fiber cable, and USB-C power to the receiver, and you're ready to go!

FAQ

What is the maximum supported resolution? Does it support 4K 60Hz?

Yes, the HE01FE-4K6G supports up to 4K60Hz 4:4:4.

Is audio transmission stable? What audio formats are supported?

Yes, it supports HDMI audio, including:

• PCM: 2CH, 5.1CH, 7.1CH

• Dolby: TrueHD, Digital (AC-3), Digital Plus (E-AC-3), Atmos (AC4)

• DTS: DTS-HD Master Audio, DTS:X

Is an additional power adapter required?

The transmitter (HE01FET-4K6G) is powered by the HDMI 5V source, while the receiver (HE01FER-4K6G) requires USB-C power.

If you experience image interference or unclear video, you can provide additional USB-C power to the transmitter.

Is the installation simple? Does it require additional setup?

The HE01FE-4K6G is plug and play and does not require software or drivers.

Are there any cable requirements?

The HE01FE-4K6G requires multi-mode fiber optic cables. SC&T testing was conducted using PRYSMIAN UC FIBRE ZIPCORD F0 CABLE LSZH ZICM202M3 180110217 2×50/125μm OM3.

Does it have latency issues?

According to our tests, the HE01FE-4K6G has a latency of less than one frame.

How do I troubleshoot audio or video issues?

If you encounter audio or video problems, check the HDMI and fiber optic cables. Ensure your HDMI cable meets HDMI 2.0 specifications.

Does it support HDCP?

Yes, the HE01FE-4K6G supports HDCP 2.2. Please verify the HDCP compatibility of your devices and HDMI cables.