Your New Favorite Vanne Papillon D'eau Elephant Wbv1132n-2w-fb-h, Matériau Du Corps - Fonte Grise Gg25, Matériau Du Disque - Acier Inoxydable Aisi 316l, Joint - Nbr, Avec Actionneur Pneumatique Double Effet Pa-da, 4v320-08 220v, Volant Mon, Bkv Apl-210n, Bpv Afc2000 Top Reviewed [ngkM7JH1]

The butterfly valve is designed for use as shut-off or regulating valves for flow control in heat supply systems, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries.

Pneumatic double-acting rotary actuators PA-DA and pneumatic rotary actuators with return spring PA-SA are designed for automation of industrial valve control process with maximum torque up to 2128 Nm.

The pneumatic valve is used to change the direction, start, stop the compressed air flow in the pneumatic system depending on the external control action.

The HDM worm gear manual doubleturn actuator with reduction gearbox allows manual setting of the required positioning of the shut-off valve by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most efficient and effective solution to the full range of manual override applications.

The limit switch unit is designed for visual and electrical signaling of the end positions of the valve shut-off body: valve, tap or disc gate. It is mounted on top of the pneumatic actuator surface and is connected to the actuator shaft in DIN standard. The sealed box usually contains two sensors, which monitor the position of the actuator shaft and signalize in extreme positions. OMRON microswitches, inductive sensors or reed switches are used as sensors. Visual indication of the position can be observed on the housing of the unit there is a 3D visual indicator RED-CLOSED and GREEN-OPEN.

The air treatment unit is designed to clean compressed air from moisture droplets and solid particles, remove condensate, automatically maintain the pressure at the preset level, supply lubricant from the tank in the compressed air flow to the elements of the pneumatic system.

 

 

Technical parameters of Elephant WBV1132N-2W-Fb-H butterfly valves, body material - gray cast iron GG25, disc material - stainless steel AISI 316L, sealing - NBR, with double-acting pneumatic actuator PA-DA, 4V320-08 220V, handwheel MON, LSU APL-210N, ATU AFC2000:

Butterfly valves WBV1132N-2W-Fb-H, body material - grey cast iron GG25, disk material - stainless steel AISI 316L, seal - NBR, with pneumatic actuator double action PA-DA, 4V320-08 220V, handwheel MON, LSU APL-210N, ATU AFC2000

 

 

Dimensions and dimensions of butterfly valves Elephant WBV1132N-2W-Fb-H, body material - gray cast iron GG25, disc material - stainless steel AISI 316L, sealing - NBR, with double-acting pneumatic actuator PA-DA, 4V320-08 220V, handwheel MON, LSU APL-210N, ATU AFC2000:

Sketch Butterfly valves WBV1132N-2W-Fb-H, body material - grey cast iron GG25, disk material - stainless steel AISI 316L, seal - NBR, with pneumatic actuator double action PA-DA, 4V320-08 220V, handwheel MON, LSU APL-210N, ATU AFC2000

 

 

Materials of butterfly valves Elephant WBV1132N-2W-Fb-H, body material - gray cast iron GG25, disc material - stainless steel AISI 316L, sealing - NBR, with double-acting pneumatic actuator PA-DA, 4V320-08 220V, handwheel MON, LSU APL-210N, ATU AFC2000:

Sketch of parts and materials Butterfly valves WBV1132N-2W-Fb-H, body material - grey cast iron GG25, disk material - stainless steel AISI 316L, seal - NBR, with pneumatic actuator double action PA-DA, 4V320-08 220V, handwheel MON, LSU APL-210N, ATU AFC2000

 

 

Technical data of PA-DA pneumatic actuators:

№	Name	Material
1	Enclosure	extruded aluminum
2	Side plugs	cast aluminum
3	Gear	stainless steel
4	Piston	steel/aluminum
5	Plugs	stainless steel
6	Piston ring	NBR
7	Springs	spring steel
8	Piston bearing	engineering plastic
9	Piston ring	NBR
10	Plug	NBR
11	Thrust ring	engineering plastic
12	Ring	engineering plastic
13	Washer	stainless steel
14	Spring clip	stainless steel
15	Indicator	plastic
16	Indicator housing	plastic
17	Bearing	engineering plastic
18	Cam	steel
19	Bearing	NBR
20	Bearing	engineering plastic
21	Bearing	engineering plastic
22	Sealing ring	NBR
23	Sealing ring	NBR
24	Bearing	stainless steel
25	Adjustment nut	stainless steel
26	Adjustment screw	stainless steel
27	Sleeve	aluminum

Parts and material sketch of the PA-DA pneumatic actuator

 

 

Technical parameters of pneumatic valve 4V320-08 220V:

Name	meaning
Type of pneumatic valve	slide valve
Working pressure, bar	1.5 ÷ 8
Supply voltage, V	220 V
Total power, Va	4.5
Control	double-sided electromagnetic
Frequency of operation, cycle/sec	5

Pneumatic valve 4V320-08 220V

 

 

Dimensions and dimensions of pneumatic valve 4V320-08 220V:

Pneumatic valve model	4V320-08
A, mm	71.9
B, mm	45
C, mm	94.4
D, mm	27
E, mm	69
F, mm	40
I, mm	24
K, mm	40
L, mm	188.8
M, mm	69.4
N, mm	50
O, mm	82.4
P, mm	24
S, mm	20
T, mm	6.5
U, mm	2.4
V, mm	4
H, mm	82.4

Sketch of dimensions and dimensions of pneumatic valve 4V320-08 220V

 

 

Technical parameters of the handwheel MON:

Name	Value
Climatic version	U,UHL,T,OM
Degree of protection, IP	67
Connection type	ISO 5211

Manual doubler MON

 

 

Dimensions and dimensions of the handwheel MON:

Model	MON1-250-T26-ISO	MON2-450-T28-ISO	MON3-700-T38-ISO	MON4-1200-T54-ISO
b1, mm	14	17	22	27
N, mm	22	22	28	32
b2, mm	14	17	22	27
M, mm	16	18	22	30
D1, mm	Ø50	Ø70	Ø102	Ø102
4-M1, mm	4-M6	4-M8	4-M10	4-M10
D2, mm	Ø70	Ø102	Ø125	Ø125
4-M2, mm	4-M8	4-M10	4-M12	4-M12
E, mm	70x70	95x95	114x114	129x129
D3, mm	Ø50	Ø70	Ø102	Ø125
4-Ø1, mm	4-Ø6.5	4-Ø8.5	4-Ø10.5	4-Ø12.5
D4, mm	Ø70	Ø102	Ø125	Ø140
4-Ø2, mm	4-Ø8.5	4-Ø10.5	4-Ø12.5	4-Ø16.5
A, mm	90	125	140	188.5
B, mm	55	64	71	93
ØC, mm	Ø88	Ø110	Ø129	Ø174
F, mm	115	135	166	202
T, mm	44	62.5	70	94
Y, mm	145	178	212	280
H, mm	120	133	180	195
S, mm	53	56.5	68.7	84
K, mm	10	13	12.5	15
Ø hand wheel, mm	180	200	280	320

Sketch of dimensions and dimensions of the MON handwheel MON

 

 

MON handwheel materials:

№	Name	Material
1	Stem for mounting the pneumatic actuator	Steel 45
2	Sealing ring	EPDM
3	Fixing spring	Spring steel
4	Upper end cover	Aluminum alloy
5	Screw	Steel 304
6	Locking bracket (main rod)	Steel 304
7	Housing	Aluminum alloy
8	Sealing ring	EPDM
9	Gear unit	Cast iron BCh50
10	Transition coupling	Cast iron BCh40
11	Gear stem	Cast iron BCh40

Materials of the handwheel

 

 

Technical parameters of limit switch unit APL-210N:

Name	Value
Model of limit switch unit	APL-210N
Maximum voltage of limit switch, V	250
Working environment temperature, °C	-40 to +80
Service life, years	10

Limit switch unit APL-210N

 

 

Dimensions and dimensions of the APL-210N limit switch unit:

Model	H, mm	L, mm	B, mm	D, mm	D1, mm	M
APL-210N	77	112	88	10	5	20x1.5

Sketch of dimensions and dimensions of limit switch unit APL-210N

 

 

Main parameters of the AFC2000 air treatment unit:

Operating pressure, bar	8
Maximum pressure, bar	10
Adjustable pressure range, bar	0,5 ÷ 9
Breaking pressure, bar	15
Air connection	1/4”
Operating temperature, C	-5 to +60
Filter particle size, µm	40
Oil viscosity	ISO VG 32
Weight, kg	0,395
Set composition	filter-moisture separator, pressure regulator, lubricator, bracket

Air treatment unit AFC2000