The Perfect Contusion Colorshift Wheel Paint Kit Collection [bOZh8LAD]

This Wheel Paint Kit includes everything you need to paint your wheels Contusion Colorshift . From the primer , basecoat, and topcoats to the optional prep and masking materials – each item has been specially put together for you in one all-inclusive bundle. You simply choose the desired color, project type, finish (Matte, Satin or Gloss), and optional add-ons. Then we handle the rest. Doesn’t get easier than this!

About this color: is a colorshift that shifts between blue/green/purple/red.

Details About This Kit: This is for good condition wheels only. You will need to get high build primer in addition to this kit if you are refinishing / smoothing out curb rash. 

This is only to be used over powder coat, paint, or aluminum wheels. NOT CHROME. 

*Spraying over chrome can cause poor adhesion. Some customers have good luck with sand blasting the chrome then using adhesion promoter, but do this at your our risk*

Steps to using the kit:

1. Wash your wheels very well to get the brake dust off. We recommend using Brake Dust Pro + a scrubber mitt
2. Dry your wheels & then wipe down with the included wax & grease remover (avoid getting on the tires to avoid drying the rubber out)
3. Scuff the entire surface you are planning to paint with the included scuff pad & paste until the entire finish is flat & "scratched up".
4. Rinse with warm water and dry the wheel with a clean rag & compressed air.
5. Mask the tires and any other areas you don't want to get overspray on. Make sure no masking is touching the surface of the wheel to avoid bridging.
6. Wipe the entire surface with a clean microfiber & the included wax & grease remover
7. Shake the primer cans according to the label. Then spray 1 light coat on all 4 wheels, wait 5 mins, then spray 1 medium wet coat on all 4 wheels
8. Wait 1hr after all wheels are 100% dry to the touch
9. Shake basecoat cans according to the label. Then spray 2-4 basecoats on the wheels (wait 10 mins or until flashed in between coats) until the desired effect & color is achieved.
10. Wait 30 mins after the basecoat is 100% dry to the touch
11. Spray 2-4 wet coats or clearcoat with 10 mins or until fingerprinting (check masking) in between coats
12. Unmask after a minimum of 30mins.
13. Let dry 8hrs before handling them

✔ Includes all materials needed to paint your wheels

✔ One Wheel Kit properly covers most sets of 4 wheels (up to 20”)

✔ Step by step video guides available

✔ TSS experts are available and ready to help via chat or phone!

• Wheel Faces Only / Gloss

• (4) Contusion Colorshift Spray Can - Single Spray Can / Heavy
• (4) 2k High Gloss Topcoat Aerosol Spray Can | Car-Rep - Gloss
• (3) Car-Rep 2k Epoxy Primer / Sealer Spray Can - Black

• Wheel Faces Only / Matte

• (4) Contusion Colorshift Spray Can - Single Spray Can / Heavy
• (4) 2K Matte Clear Topcoat Aerosol Polyurethane Spray Can | Car-Rep - Matte
• (3) Car-Rep 2k Epoxy Primer / Sealer Spray Can - Black

• Wheel Faces Only / Satin

• (4) Contusion Colorshift Spray Can - Single Spray Can / Heavy
• (4) 2k Satin Topcoat Aerosol Spray Can | Car-Rep - Satin
• (3) Car-Rep 2k Epoxy Primer / Sealer Spray Can - Black

• Entire Wheel (Including Barrels) / Gloss

• (8) Contusion Colorshift Spray Can - Single Spray Can / Heavy
• (8) 2k High Gloss Topcoat Aerosol Spray Can | Car-Rep - Gloss
• (6) Car-Rep 2k Epoxy Primer / Sealer Spray Can - Black

• Entire Wheel (Including Barrels) / Matte

• (8) Contusion Colorshift Spray Can - Single Spray Can / Heavy
• (8) 2K Matte Clear Topcoat Aerosol Polyurethane Spray Can | Car-Rep - Matte
• (6) Car-Rep 2k Epoxy Primer / Sealer Spray Can - Black

• Entire Wheel (Including Barrels) / Satin

• (8) Contusion Colorshift Spray Can - Single Spray Can / Heavy
• (8) 2k Satin Topcoat Aerosol Spray Can | Car-Rep - Satin
• (6) Car-Rep 2k Epoxy Primer / Sealer Spray Can - Black