Staff Pick Invensys Triconex 8312 Power Supply Module Complete Set [wupZcHQb]

Chassis Type

• Main/Expansion/RXM

Nominal Voltage

• 230 VAC

Input VAC @ 47-63 Hz

• 185–285

Input VDC

• Not applicable

Fuse Rating and Type

• 2.5 amps, time-delay

Output Hold Time (Nominal to 0 Volts)

• 20 ms minimum

Diagnostic Indicators

• PASS, FAULT, ALARM, TEMP, BAT LOW

Power Modules

• 230 VAC – 175-Watt Power Module

Power Module Specifications

• Isolation: Greater than 1,000 VAC or 1,500 VDC, Input to Output
• Input Terminations: Protected by safety cover, accepts three 12-gauge wires (3.310 mm²): neutral, hot, and protective earth (chassis ground)
• Over-Temperature Sensor: Temperature warning monitor that trips when internal temperature exceeds 181°F (83°C); typically occurs at ambient temperature 140°F (60°C) or higher
• Alarm Contacts: Normally open, normally closed, and common; each contact supports 120 VAC @ 1 amp, accepts 12-gauge (3.310 mm²) wire, and is protected by a safety cover
• Input Power Required: 240 watts minimum per Power Module
• Output Power: 175 watts at 140°F (60°C)
• Output Voltage: 6.5 VDC, ±1% under all operating conditions
• Output Current: 27 amps maximum at 140°F (60°C) ambient

Overall Dimensions: 19 in wide by 22.75 in high by 17.75 in deep
(48.3 cm by 57.8 cm by 45.1 cm)

Weight: 7.2 lbs. (3.3 kg.)