Black Friday Doorbuster 89sabers Obi Wan Kenobi Rots/tv Series Install Chassis Holiday Cheer Edition [UihEWL3n]

3D printed chassis for the 89Sabers Obi Wan ROTS version and TV Series version of the hilt. Not intentionally compatible with any other saber design.

Comes in five separate parts, a static upper piece that needs to be secured to the brass thin neck, this holds the ShtokCustomWorx blade side PCB, and is wired directly to the emitter NPXL connector. 

Second part is the fully removable chassis which holds the choice of soundboard, removable 18650 battery, 28mm bass speaker, short pin NPXL connector(connects to blade side PCB), optional high amp killswitch and optional OLED screen. 
Includes a short emitter hilt side connector holder as well as printed parts for the control box switches and spring loaded connector contact sets. 
Two spring loaded connector contact sets are included with physical prints.

Parts list for install:
-CFX, Proffie, GHV4
-2x NPXL shortpin hilt side connectors
-ShtokCustomWorx blade side PCB
-two brass tactile 1.5mm switches (included with chassis print)
-removable 18650 protected button top cell (Option 2 contacts included with chassis print)
-TCSS/KR OLED screen (optional)
-high amp killswitch
-28mm bass speaker
-qty.2 Two Contact Spring Loaded Connector Set (included with chassis print)

FULL PARTS KIT includes:
-choice of soundboard (CFX, ProffieV3.9 or GHV4)
-qty.2 unassembled NPXL V4 shortpin hiltside connectors
-qty.1 Blade Side PCB
-qty.1 KeepPower 18650 3500mah 15A button top protected cell
-qty.1 blue TCSS OLED screen (for OLED options)
-qty.1 high amp killswitch
-qty.1 28mm X-BASS 4ohm/3W bass speaker
-qty.2 Two Contact Spring Loaded Connector Set