Flash Sale Nano Hone Diamond Resin Plate Whetstone, 3 Micron Dr-3 Essentials [fxn6HDLh]

The NANO HONE Diamon Resin Plates are completely made in their workshop by Hap Stanley from a vegetable fiber resin, which is a bit softer then other resins on the market. This results in less damage to the extremely fine apex of the edge while sharpening, especially at the finer grits. Not only is the resin environmentally friendly, it is also very tough and slightly hydrophobic, resulting in a stone that can be used dry, with a few drops of water, or with a very light oil.

These stones are micron accurate and consistent from start to finish so you know exactly what to expect for the life of the stone. Each stone is color coded for quick and easy reference while sharpening. The best technique when using these stones is to apply pressure while pulling away from the edge as to not cut into the stone and damage the apex.

The 3 micron stone is a great finishing stone for a perfect working edge on all of your knives. It's not too rough to leave major scratches and fine enough to remove the burr and get back to cutting

Grit: 3 micron Extra Fine

Stone Size: 8.25" x 2.95" x 0.375" (210mm x 75mm x 10mm)

Made in: USA