Explore 27rx142g, .404, 142 Drive Link Hyper-skip Ripping Saw Chain - Beat The Rush [8oPErGWg]

27RX142G, Oregon .404 pitch .063 gauge 142 Drive link Hyper Skip Ripping saw chain in RipCut in super-skip 9" cutter sequence 

 Oregon 27RX142  404 chainsaw chain is built with a hyper skip sequence 9 inches between left and right cutters, allowing greater chip clearance on super wide cuts. It is a specialty ripping chain designed to be used exclusively on portable sawmill slabbing machines with electric motors and gas engines, such as the D&L, Lucas, package, and Peterson sawmills. It is commonly used to slab logs into lumber, cutting burls and stumps into tabletops. This ripping chain gives you a smooth, consistent surface when cutting parallel to the grain of a log, and because it has few cutters, it is quicker to sharpen. This chain is recommended for milling purposes only; therefore, not recommended for standard handheld use.

• Sharpens at a 10-degree angle with a 7/32" file (part#_70502_)
• Maintain depth gauge at .030 clearance

 If you have a 27, 52, 59, or 68 stamped on your current Oregon drive link and there are 142 drive links counted or bar stamped 404 063 142DL, then this chain will fit your saw.

Product Type  Saw Chain  Prop 65 Description WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov