Great Deal Ifm Ac2752 As-interface Pcb Module Special: 75% Discount [COWQ0UbA]
Your browser does not support the video tag.
Application
Design
Only for operation with AS-i masters with the profile M4
Application
Housing for panel mounting
Electrical data
Operating voltage [V]
18...31.6 DC
Max. current consumption from AS-i [mA]
180; (without sensors: < 30 mA; inputs and outputs active: < 180 mA)
Protection class
III
Max. current load total [A]
0.15; (total current for all inputs and outputs supplied from AS-i: 150 mA)
Integrated watchdog
yes
Inputs / outputs
Number of inputs and outputs
Number of digital inputs: 4; Number of digital outputs: 4
Inputs
Number of digital inputs
4
Input circuit of digital inputs
PNP
Sensor supply of the inputs
AS-i
Voltage supply [V]
18...30; (DC)
Max. total current rating of inputs [mA]
150
Input current High [mA]
6...10
Input current low [mA]
0...2
Switching level high [V]
> 11
Digital inputs protected against short circuits
yes
Outputs
Electrical design
PNP
Number of digital outputs
4
Circuit
PNP
Voltage range DC [V]
18...30; (DC)
Max. current load per output [mA]
100; (utilization category DC-13 (control of electromagnets): 2,5 W (IEC 60947-5-1))
Max. current load outputs total [A]
0.15
Short-circuit proof
yes
Electrically separated
yes
Operating conditions
Ambient temperature [°C]
-25...55
Protection
IP 20
AS-i classification
AS-i version
3.0
Extended addressing mode
yes
AS-i master profile
M4
AS-i profile
S-7.A.7
AS-i I/O configuration [hex]
7
AS-i ID code [hex]
A.7
AS-i certificate
102301
Mechanical data
Weight [g]
68
Type of mounting
Installation in a surface-mounted housing
Dimensions [mm]
31.1 x 12 x 76.6
Material
housing: PC potted
Displays / operating elements
Display
Power
LED, green
errors
LED, red
Function
LED, yellow
Remarks
Remarks
A watchdog function switches the outputs off if there is no communication on the AS-i line.
Install the unit so that exposed parts cannot be touched.
Installation in a surface-mounted housing with the dimensions of 68 x 136 x 53 mm (LxWxH), e.g. Schneider Electric Harmony XALD03, XALD04
Do not connect any of the following points to an external potential:
0-, I+, I1, I2, I3, I4
The connections are electrically connected with the AS-i cable.
Can be used up to a height of 2000 metres above sea level
Pack quantity
1 pcs.