Massive Discount Mark Levinson 380s Preamplifier W/remote Now 55% Cheaper [pOod74NU]

For your consideration, we have the highly regarded Mark Levinson 380S Preamplifier for sale. We acquired the preamp from the original owner, and the unit is in perfect working condition, and in very good physical condition.  The only blemishes of note is a small nick on the bottom edge of the faceplate, under the Mute button, and a few light marks on the Volume knob. A look under the cover shows the high build quality of this extremely clean preamplifier with Military spec components through out. The remote has some blemishes but it is in perfect working order and good physical condition. Included with the unit are the factory remote, original owner's manual, and original power cable. See the attached images for more details on the physical condition of the preamp.

We don't have the original box for this unit, but we take packaging and shipping seriously. We spare no expense and use heavy duty boxes, several inches of polyethylene foam on all sides of the unit, and use water activated, fiber reinforced tape on all seams. 

From Mark Levinson:

The Nº380S Preamplifier is based on the circuit topology of the Nº380, but benefits from significant component upgrades. Like all Mark Levinson Special edition components, it offers a clear performance advantage.

DESCRIPTION

Two-channel, solid-state line preamplifier with remote control, 3 pairs balanced inputs on XLRs, 4 pairs single-ended inputs on RCAs, 1 pair balanced main outputs on XLRs, 1 pair single-ended main outputs on RCAs, 2 pairs record outputs on RCAs, communication connections on 8-pin modular RJ-45 jacks, IR input and trigger output on 3.5mm phone jacks, and RS-232 on 6-pin RJ-11 jack. Maximum voltage gain: 0, 6, 12, or 18dB, individually selectable for each line input. Volume-control range: 80.0dB. Gain resolution: 0.1dB steps above 23.0 on display (–57dB), 1.0dB steps below 23.0 on display (–57dB). Frequency response: 10Hz–40kHz, ±0.2dB. Input overload: 1.6V on XLR, 800mV on RCA (18dB gain setting); 3.3V on XLR, 1.6V on RCA (12dB gain); 6.6V on XLR, 3.3V on RCA (6dB gain); 13.2V on XLR, 6.6V on RCA (0dB gain). Input impedance: 100k ohms. Output impedance: <50 ohms. THD+N: <0.001%. Channel separation, any input to any output, input terminated: >90dB. Residual noise, 20Hz–20kHz, input terminated: <–94dBV. Power consumption: 50W maximum.