Elegant Stratocaster Vintage-style Rosewood Replacement Neck Unfinished, 21 Fret, 9 1/2" Radius For Women [awB7X3ZV]

Replacement vintage style Stratocaster guitar neck, made in Japan. This neck has a slightly flatter-than-vintage spec. 9 1/2" (240mm) fingerboard radius to allow for easier string bending.

• Jumbo frets (Crown: 2.62mm width, 1.17mm height)
• 21 frets
• 42mm width at nut slot.
• 8.5mm diameter tuning machine holes.
• Ready for finishing.
• Trussrod adjustment at heel end of neck.
• Maple neck with Rosewood fingerboard.
• Measurement of thickness at 1st fret is 22mm
• Measurement of thickness at 12th fret is 24.5mm
• 56.2mm width at heel of neck (where it joins the body).

Please note that this replacement Stratocaster guitar neck comes completely fretted and with the nut slot already cut. However, the nut itself does not come with the neck and needs to be ordered separately. Neck mounting holes are not drilled. The tuning machine holes are drilled to take vintage tuners such as our vintage Kluson tuners or similar. For contemporary tuners like Sperzel, Gotoh, Grover, the holes in the headstock will need to be widened to 10mm.

All necks require a final level, crown, and polish and may need to be fine-tuned to your instrument and playing preferences. Your new neck should be carefully inspected prior to installation and/or modification as necks are rendered non-returnable once altered. Due to the organic nature of wood each neck is considered unique and may have minor variations in grain or finish from those pictured. Armstrong Music does not sell what is commonly referred to as seconds or blems. Hosco neck heels are made to Fender USA dimensions and tolerance, this may not account for neck pocket shrinkage or expansion over time. Some neck pocket modification may be required.

Armstrong Music recommends that if you are not familiar with replacement neck installation that you contact a qualified luthier or repair shop.

Important Information -

Width of neck at nut slot - 42mm
Width of neck at heel (where it joins the body) - 56.1mm
Depth of neck at heel (excluding fingerboard) - 19mm
Diameter of tuning holes - 8.5mm