Money Saver Baja Designs Double Amber Lp6 & Mounting Kit For 21+ Ford Bronco W/ Steel Bumper Flash Sale: 40% Off [6gMiBx4j]

Style, fitment, performance, and ease of installation. This kit is designed for the Ford Bronco enthusiast that is looking to light up the trail with ample light, and differentiate yourself from the pack. This kit specifically utilizes a set of LP6 Driving/Combo Lights. The Rudy's brackets used to mount this light setup ensure no cutting or drilling are needed, and the wiring that is included will allow for the lights to be operated from upfitter switches in the cab. This is a comprehensive kit and does not require any additional parts for installation.

The LP6 Pro is a 6-inch powerhouse featuring a total of 10,300 lumens and a 200° spread of useable LED light. The LP6 features 8,600 forward projecting lumens and 1,700 lumens of dedicated peripheral lighting courtesy of our patented Integrated Peripheral Technology (IPT).

To keep your light performing at its highest potential, the LP6 integrates our proprietary Direct Ducted Cooling (DDC) technology. This feature allows air to travel through the front of the housing, over the rear heat sinks - drastically improving cooling capacity and performance.

With an amber day-time running light, low power, and high power mode, the LP6 will fulfill all your lighting needs.

This harness was designed with intention of being used in conjunction with power modules such as sPOD, Switch-Pros and factory upfitter systems. This harness will ensure that you don't run power to both the high and low circuits at the same time when wiring your LP series lights. If you're looking to take the guess work out of wiring your LP series lights this is the harness for you.

Features:

• Forward Projecting Lumens: 8,600 Utilizing 6 LEDs
• Forward Projecting Wattage/Amps: 90W / 6.5A
• IPT Lumens: 1,700 Utilizing 4 LEDs
• IPT Wattage/Amps: 15W / 1.0A
• Backlight Wattage/Amps: 4.14W / 0.3A
• Dimensions: 6.5" Height / 6.5" Width / 3.2" Depth
• Weight: 4.2lbs
• Mating Connector: DT06-4S Deutsch
• LED Life Expectancy: 49,930 Hours
• Front Lens: Hardcoated Polycarbonate
• Housing: Hard Anodized Machined Aluminum
• Bezel: Billet Machined Aluminum
• Hardware & Bracket Material: Stainless Steel
• Exceeds MIL-STD810G (Mil-Spec Testing)
• Built-In Overvoltage Protection
• IP69K (Waterproof up to 9ft & Pressure Washable)
• IK10 Compliant (Mechanical Impact Testing)

Included:

• (2) LP6 Pro Driving/Combo
• Upfitter Lock Out Harness
• Required Hardware
• Rudy's Bumper Light Bracket

Fitment:

• 2021+ Ford Bronco W/ Steel Bumpers ONLY

Note:

• Will NOT fit Bronco Sport models
• Will NOT Fit Broncos with Plastic Bumpers
• This model comes equipped with a Upfitter switch style wiring harness