Crazy Price 720-0218 - Actuators - 720 Series Eco-friendly [sI08MKez]

12VDC, 36" cable output, pivot mounting bracket, .07 inches per second, no feedback, 3 Position Relay system.

DETAILED INFORMATION
Standard 720 Series actuator, which runs on a 12V source, with an output speed of 0.07 an inch per second. Total stroke length is 3 inches, and this unit has a 36" Push Pull cable as its output. This system works via connecting Terminals to a Common Ground as seen in the Terminal block pin-out:

• Block 1: 12V + to motor (RED WIRE)
• Block 2: 12V - to motor (BLACK WIRE)
• Block 3: Ground Wire
• Block 4: 12V + VDC
• Block 5: Connect to Ground to retract actuator.
• Block 6: Connect to Ground to mid-stroke actuator.
• Block 7: Connect to Ground to extend actuator.

!!! DO NOT CONNECT MORE THAN ONE OF THE 3 POSITION WIRES (TERMINALS 5, 6 , or 7) TO GROUND AT ONE TIME, AS IT MAY DAMAGE THE ACTUATOR. ALL GROUNDS MUST BE COMMON FOR ACTUATOR TO FUNCTION PROPERLY. !!!

ADDITIONAL INFORMATION

• Operating voltage: 12VDC nominal
• Output force: 50-lbs
• Motor current (no load): 1 amp
• Motor current stalled: 7 amps
• Stroke (max): 3 inches
• Stroke speed: 0.07 inch per second
• Operating temp: -40F to 158F (-40C to 70C)
• Output Type: 36" Push Pull cable
• Mounting bracket: Pivot mount
• Feedback potentiometer: No
• Availability: Built to order - 2 week Lead Time

SPARE PARTS

• 720 Series 12V motor - 027-0543
• 720 Series Pivot Mount - 001-7867
• 720 Series Motor Boot - 015-0023
• 720 Series Push Pull Cable - 017-0024