As Seen On Tv Viair 150psi 2.68cfm X'treme Duty Onboard Air System - Universal Fit - 10009 Solution [BXdwaOlI]

VIAIR Corporation - X'treme Duty Onboard Air System

VIAIR’s X’treme Duty Onboard Air System is a pre-packaged compressed air solution that provides two 350C, 100% duty cycle compressors, a 2.0 gallon air tank, inline pressure regulation, and all components needed to install a working system capable of inflating tires, managing air locking differentials, and more. For up to 37" tires.

Fits the following applications:

Universal

Part #: 10009

Specifications:

– 12-Volt
– 2.68 CFM
– Permanent Magnetic Motor
– Duty Cycle: 100% @ 100 PSI
– Max. Working Pressure: 150 PSI
– Max. Amp Draw: 37 Amps
– Ingress Protection Rating: IP67

Features:

– 2.0 Gallon VIAIR Air Tank
– (2) 350C VIAIR Compressors
– 30ft. Coil Hose with Quick Connects
– Tire Inflation Gun with 160 PSI Gauge
– Dash Panel Gauge with ON/OFF Switch
– 0-220 PSI Pressure Regulator
– Blow Gun Air Tool
– Sealed Pressure Switch (110 PSI on, 145 PSI off)
– (2) 40-amp Relays
– (2) T-Fittings (1/4” (M) x 1/4″ (F) x 1/8” (F)
– 1/4” Quick Connect Stud (F)
– 1/4” Quick Connect Coupler (F)
– 1/4” 175 PSI Safety Valve
– 1/4” Drain Cock
– (2) 1/8” BSP to 1/4” NPT
– (4) 1/4” Compression Fittings
– 20ft. 12-Gauge Wire with Inline Fuse Holder
– 4” Strip of Continuous Grommet Material
– Accessory Airline
– Electrical Connections

Fill Rates:

– 2.0 GALLON TANK
0 to 145 PSI - 1 min. 40 sec. (± 05 sec.)
110 to 145 PSI - 32 sec. (± 03 sec.)

– 35″ X 12.5″ TIRE
0 to 30 PSI - 4 min. 40 sec. (± 10 sec.)
15 to 30 PSI - 2 min. 20 sec. (± 05 sec.)

– 37″ X 12.5″ TIRE
0 to 30 PSI - 5 min. 00 sec. (± 15 sec.)
15 to 30 PSI - 2 min. 40 sec. (± 10 sec.)

NOTE: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8″ is 10 ~ 11 ft. lbs. Recommended torque for 1/4″ and 3/8″ is 12 ~ 15 ft. lbs.