Best Quality Viair 150psi 1.38cfm Medium Duty Onboard Air System - Universal Fit - 10003 Instant 95% Discount [ihtVWpud]

VIAIR Corporation - Medium Duty Onboard Air System

VIAIR’s Medium Duty Onboard Air System is a pre-packaged compressed air solution that provides a 33% duty cycle 325C compressor, 2.5 gallon air tank, and all components needed to install basic vehicle-based pneumatics. For up to 33" tires.

Fits the following applications:

Universal

Part #: 10003

Specifications:

– 12-Volt
– 1.38 CFM
– Permanent Magnetic Motor
– Duty Cycle: 33% @ 100 PSI
– Max. Working Pressure: 150 PSI
– Max. Amp Draw: 21 Amps
– Ingress Protection Rating: IP67

Features:

– 2.5 Gallon VIAIR Air Tank
– 325C VIAIR Compressor
– Dash Panel Gauge with ON/OFF Switch
– Pressure Switch with Relay (110 PSI on, 145 PSI off)
– Reducer: 1/8” (F) to 1/4” (M)
– 1/4” Quick Connect Coupler (M)
– 1/4” 175 PSI Safety Valve
– 1/4” Drain Cock
– 20ft. 12-Gauge Wire with Inline Fuse Holder
– 4” Strip of Continuous Grommet Material
– Accessory Airline
– Electrical Connections

Fill Rates:

– 2.5 GALLON TANK
0 to 145 PSI - 4 min. 15 sec. (± 10 sec.)
110 to 145 PSI - 1 min. 25 sec. (± 05 sec.)

– 31″ X 10.5″ TIRE
0 to 30 PSI - 4 min. 40 sec. (± 10 sec.)
15 to 30 PSI - 2 min. 30 sec. (± 05 sec.)

– 33″ X 12.5″ TIRE
0 to 30 PSI - 6 min. 40 sec. (± 15 sec.)
15 to 30 PSI - 3 min. 20 sec. (± 10 sec.)

NOTE: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8″ is 10 ~ 11 ft. lbs. Recommended torque for 1/4″ and 3/8″ is 12 ~ 15 ft. lbs.