Holiday Special Front Splined Sway Bar Kit, 1963-87 C10 Device [c4wsNHu6]

If you are looking to maximize handling and provide added tire clearance, you will need a splined sway bar. Over the past few years we have played with a number of sway bar rates and found this combination to be the ticket.  Roughly 1250lb bar rate calculated with the bar in the factory location.

Our front splined sway bar kit is offered for use with a No Limit Engineering Wide Ride front suspension or other suspension systems where the end links attach to the lower control arm.  In those applications, we send heavy duty end links and tabs that can be welded onto your lower control arms.  The sway bar arms are also not bent and will need to be done by the installer.  There are so many different wheel and suspension combinations, that we can not make a standard bar arm.

• Made in the USA
• 1.62" Stepped Down 1.75" - 48 Spline Hollow Sway Bar
• Satin Black Powder Coated Housing and Mounting Brackets
• All Grade 8 Hardware
• 19" Overall Length, 0.75" Thick Arms
• Delrin Bushings
• Available for use with NLE Wide Ride OR Universal