Most Popular Microchip Technology 4/8-bit Parallel-input Latched Drivers, Part #mic5801ywmtr | Driver | Dex Enjoy 65% Off [uIFBbX2A]

Most Popular Microchip Technology 4/8-bit Parallel-input Latched Drivers, Part #mic5801ywmtr | Driver | Dex Enjoy 65% Off [uIFBbX2A] are high-voltage, high-current integrated circuits comprised of four or eight CMOS data latches, a bipolar Darlington transistor driver for each latch, and CMOS control circuitry for the common CLEAR, STROBE, and OUTPUT ENABLE functions. The bipolar/MOS combination provides an extremely low-power latch with maximum interface flexibility. MIC5800 contains four latched drivers; MIC5801 contains eight latched drivers. Data input rates are greatly improved in these devices. With a 5V supply, they will typically operate at better than 5 MHz. With a 12V supply, significantly higher speeds are obtained. The CMOS inputs are compatible with standard CMOS, PMOS, and NMOS circuits. TTL or DTL circuits may require the use of appropriate pull-up resistors. The bipolar outputs are suitable for use with relays, solenoids, stepping motors, LED or incandescent displays, and other high-power loads. Both units have open-collector outputs and integral diodes for inductive load transient suppression. The output transistors are capable of sinking 500 mA and will sustain at least 50V in the OFF state. Because of limitations on package power dissipation, the simultaneous operation of all drivers at maximum rated current can only be accomplished by a reduction in duty cycle. Outputs may be connected in parallel for higher load current capability.

Features: • 4.4 MHz Minimum Data Input Rate • High-Voltage, High-Current Sink Outputs • Output Transient Protection • CMOS, PMOS, NMOS, and TTL Compatible Inputs • Internal Pull-Down Resistors • Low-Power CMOS Latches

MCH:MIC5801YWMTR 

MIC5801YWMTR