Eye-catching Troy Lee Designs Speed Knee Sleeve Diy Kit [c5TqfPIZ]

The Troy Lee Designs Speed Youth Knee Sleeves use 4mm thick D3O protection to provide ultra-lightweight knee protection that won't slow you down.

Silicone grippers hold the sleeves firmly in place while the seamless construction ensures maximum comfort.

Fitting instructions TLD Speed Knee Sleeves

Take measurements 10 cm above the knee CENTER for Lower Thigh measurement and 15 cm below knee CENTER for Calf measurement. Measurements should fall into one of the following size categories:

The Speed Knee Sleeve should not be loose in any area. Make sure there are no gaps between pad and leg, and the openings are snug. The kneepad foam padding shall be placed directly over the kneecap

Cleaning Instructions

Hand wash cold only. Do not dry clean or bleach. Drip dry. Do not clean your protective gear with anything but soap and water. Do not use any abrasive cleaners or pads. Do not use hot water or chemical cleaners or any solvents which contain petroleum-based products like benzene or gasoline on your protective gear. Your protective gear can be weakened by these substances and may not provide its intended protection in an accident, which can result in serious injury or death. Do not use hair dryers or heaters to dry your protective gear.