Name: RAP124 by Dixon Valve | Rapp-it Pipe Repair Kit | Bandage Size: 4 Wide x 12ft Long
Brand: technovaprecision.com
SKU: HBS26151251256
Price: 25.99 USD
Availability: InStock
Rating: 4.58 (8 reviews)

Us Stock Rap124 By Dixon Valve | Rapp-it Pipe Repair Kit | Bandage Size: 4" Wide X 12ft Long Special: 40% Discount [oakzu2hZ]

Features:
No mixing or measuring required; easy to apply. Quickly contains leaking substances, keeping a workplace safe. Tenacious bond: 5 to 10 min.; functional cure: approx. 30 min. One product that can be used on a vast array of pipe sizes, shapes, and materials. Suitable for use on acid lines, gas, most diluted chemicals, sea water, fuels, and oil. Chemical resistance: resistant to hydrocarbons, ketones, esters, alcohols, halocarbons, aqueous salt solutions, dilute acids/bases. Suitable for wet or dry pipe: apply under fresh and saltwater.
Materials:
Bandage: woven fiberglass. Resin: water-activated polyurethane resin.
Specifications:
Pressure resistance up to 360 PSI (2,500kPA). Shore D hardness at full cure (24 hours): 80 durometer. Lap shear tensile strength on steel (1" x 1" x 1/16") 400kg (6.2MPa). Compressive strength 8,000 PSI (55 MPa).
Temperatures:
Continuous -40°F to 250°F (-40°C to 121°C) Intermittent -40°F to 300°F (-40°C to 149°C) Heat resistance: 300°F (150°C)
Approvals:
NATO Certification 4730-66-1257893
How It Works:
Shut down pipes. Apply gloves, then thoroughly clean and roughen the damaged pipe area with a metal file or wire brush. A clean, rough surface results in a successful repair. Knead steel putty until it is a uniform grey color. Apply firmly to the damaged area within 2-5 minutes of mixing. Open the foil pouch and soak the bandage in freshwater for 10 seconds. Squeeze bandage 1-2 times while in the water to help activation. It is important to apply the bandage before the putty is cured. Quickly wrap the bandage around the damaged area, extending 50mm on either side of the leak. Pull each layer tightly and firmly throughout the application, using your hand to mold and squeeze the layers together in a tightening motion. Continue to squeeze the bandage with a rotating motion until resin stops foaming and is set. Allow a minimum of 30 minutes for Rapp-it bandage to set rock hard.