Luxury Battery Combiner 200 For Lithium Batteries Next Gen [J9mkP2qZ]

(For Alternators up to 200-Amps)

• Suitable for alternators up to 200-Amps with 175-Amp continuous rating, 400-Amp closing current, and charging levels up to 18-Volts • Supplied 6-Gauge crimp terminals and 5/16-18 studs and hex nuts for connecting customer supplied 6-AWG cable leads to battery positive (+) posts. Connect customer supplied ground cable to 4-40 threaded post labeled NEGATIVE (-) on the Combiner 200 • Combiner 200L (For Lithium Batteries) switches to charge mode when the Lithium battery being charged reaches 13.8-Volts

Features & Specifications

• Protects alternator against overload from low battery levels • Waterproof and Ignition rated for explosive atmosphere • Electronic thermal monitoring with shutdown & restart • Can be used on alternators with internal regulators • Green LED Indicates when combined for charging, and red LED Indicates Overload or Low Voltage Detected Condition • Draws no current when batteries are not being charged and less than 150-Milliamps when charging is in progress, so no heat sinking or cooling required • No diodes to burn out if accidentally shorted • Withstands ambient temperature to over 175°F (80°C) for exposed or engine compartment installations • No special wiring for alternators with external sense • Optional external remote for Off/Automatic/On. Remote “ON” can be used for assisted engine starting • One (1) year factory-direct limited warranty