New Edition Lincoln Vantage 549x (deutz) Diesel Welder K3534-2 Instant 60% Discount [VhdQ1qRT]

Lincoln® Vantage® 549X (Deutz®) Diesel Welder K3534-2

The Lincoln® Vantage® 549X is a 575 amp, multi-process diesel engine welder that is equipped with a Deutz® 49.4 HP turbo-charged TD2.9L4 diesel engine. The standard stainless steel side panels and roof extend the life and durability of the Vantage 549X welder. Five different welding modes allow you to quickly switch between stick, touch start DC TIG, MIG, flux-cored and carbon arc gouging (with up to 3/8" diameter carbons).

Advanced technology built into the Vantage 549X includes state-of-the-art CrossLinc®.  Built-in CrossLinc circuitry means that the Vantage 549X communicates with a Lincoln CrossLinc wire feeder or CrossLinc remote control directly through your welding leads. Full remote amperage and voltage control is achieved without the use of a separate remote-control cable. This completely eliminates the need to go back to the welding machine to make output amperage or voltage adjustments. Other advanced features include pulsed MIG welding (when paired with the proper OPTIONAL Lincoln X-Series wire feeder).

The Vantage 549X generates 11,000 continuous watts of 120/240 volt single-phase AC auxiliary power AND 19,000 continuous watts of 240 volt three-phase AC auxiliary power. The Deutz® TD2.9L4 four-cylinder turbo-charged diesel engine is EPA Tier 4F compliant and produces 49.4 horsepower at 1,800 RPM.



Processes

Stick (SMAW)

MIG (GMAW)

Pulsed-MIG (GMAW-P)

Flux-cored (FCAW)

DC TIG (GTAW)

Air carbon arc (CAC-A) Rated:3/8-inch (9.5 mm) carbons

Applications
Maintenance & Repair
Pipeline
Power Generation
Shipbuilding
Structural

Features:

Power Without Boundaries
Offers up to 575 amps (IEC rated at 525 amps) of welding current to tackle numerous welding and carbon arc gouging applications. Select one of five basic process modes including CC-Stick, Downhill Pipe, DC Touch Start TIG®, CV-Wire, or Arc Gouging mode, which maximizes output for up to 3/8 in. (9.5 mm) carbon rods.

Generator Output
Provides up to 19 kW of continuous three-phase power to run industrial tools such as plasma cutters, pumps, or inverter welders.

Patented Chopper® Technology
Experience premium arc performance with minimized spatter for stick or pipe welding as well as enhanced gouging performance that prevents the engine from stalling, resulting in smooth material removal.

Expanded Welding Capabilities
Utilize customized modes for stainless, aluminum, and steel as well as advanced SAW and orbital pipe modes. Features pulse welding capability for better arc control in out-of-position work and low heat input for critical welds.

CrossLinc® Enabled
Allows communication through a standard weld cable to enable voltage or current control at the arc without a control cable to help improve safety, quality, and productivity with less trips to the power source and reduced jobsite clutter.

Built-in True Voltage Technology™ (TVT)
Compensates for voltage drop to further improve operations.

Reliable Operations
Engineered tough and field proven for ruggedness and durability to meet the most challenging job site needs and harshest environments.

Industrial Diesel Engine
Powered by a 49.4 hp, turbocharged Deutz® diesel engine. Runs smooth and quiet while meeting EPA Tier 4 Final compliance.

Lincoln Vantage 549X Specs