Lightweight Siren Marine Siren3 Pro Device Holiday Cheer Edition [fnwlo3Qy]

Lightweight Siren Marine Siren3 Pro Device Holiday Cheer Edition [fnwlo3Qy]

Siren Marine Siren3 Pro Main Device

• The Siren 3 Pro requires a cellular subscription plan to send unlimited data between the device and the Siren Connected Boat App.


• A SirenSat device and subscription plan are required to maintain connectivity for vessels traveling to the Bahamas or other areas without cellular coverage.

The Siren 3 Pro is the most advanced Main Device we offer. Together with the Siren Connected Boat App, our Smart Boat Monitoring System puts your boat in the palm of your hand 24/7.

Install the Siren 3 Pro on your boat to monitor and track multiple critical systems such as battery voltage, bilge pump activity, water levels, shore power status, engine performance, temperature, location & more right on the App. Some monitoring capabilities require a Siren 3 Series Wireless Sensor or Wired Sensor.

Battery Monitoring: Monitor your boat’s battery & receive alerts if voltage is low

GPS Position/Geofence: Track boat’s location & receive alerts on boat movement

NMEA 2000: Best-in-class NMEA 2000 marine electronics backbone connectivity

Digital Switching: Remotely control lights, refrigerator and more

LTE-M (4G/5G): The latest cellular technology connects you to your boat *Based on 4G/5G LTE-M availability

Physical Dimensions
6 in x 4.5 in x 2 in 152 mm x 113 mm x 50 mm

Weight
1lb .5kg

Operating Voltage
9-30 VDC

Internal Battery Type
3000mAh Lithium Polymer Battery

Internal Battery Backup Power
Up to 48 Hours Backup Power

Firmware Upgradeability
Over the Air (OTA) for both Siren 3 Pro and wireless sensors

Cellular
External Antenna, 4G/5G CAT-M1, with fall back to NB-IoT and EGPRS

Wireless
External Antenna, Sub-GHz

NMEA 2000
CAN Bus 1, M12 (5 Pin)

Application-Dependent Protocol (ex. J1939)
CAN Bus 2, M12 (5 Pin)

Satellite Modem
RS-232, M12 (12 Pin) Wiring Cable #2

Expansion Bus
RS-422. M12 (12 Pin) Wiring Cable #2

Mounting
Snap-in bracket with (4) screws provided for mounting

Positioning
Internal Antenna, GNSS, GPS/GLONASS with SBAS, (External antenna option available)

Connectivity
Interface cable with mating connector of 1m length provided for wired inputs and outputs with 24 AWG conductors.