All-in-one Pilot 2 - Bs. 16d45 Enjoy 60% Off [AKh2LyN4]

Jotun Pilot II is a one component oxidatively drying alkyd coating that has a gloss finish with good gloss retention. To be used as topcoat in atmospheric environments.

Jotun Pilot II is recommended as a topcoat, and for touch-up purposes for marine engines, topside, deck and superstructure areas and for a wide range of industrial structures.

Jotun Pilot II is able to be tinted to RAL and British Standard colours.

Features

• Reduces application cost
• No special painting skills required
• Nice finish
• Requires no mixing and has no pot life restrictions, which reduce time spent on preparation, waste, spillage and leftovers
  
• Can be applied to any surface of new or aged coatings in atmospheric conditions

• Together with primers like Alkyd primer or Pilot QD Primer, Pilot II will form a low to medium corrosion protection system, respectively, as defined by ISO 1294
  

Approvals and certificates

• Low flame spread certificate according to IMO/Solas directive
• Grain, Newcastle Occupational Health
• Food, Compliant with USA, FDA Title 21, Part 175.300 for dry solids

Drying

Drying and curing times are determined under controlled temperatures and relative humidity below 85%, and within the DFT range of the product.

Walk-on-dry: Minimum time before the coating can tolerate normal foot traffic without permanent marks, imprints or other physical damage.

Dried to over coat, minimum: The shortest time allowed before the next coat can be applied.

Surface (touch) dry: The state of drying when slight pressure with a finger does.