Name: Massive Discount Fischer 10x80 Concrete Screw Ultracut Fbs Ii Eta Approved (536860) 50 Pack Series [MU5lkw6j]
Brand: technovaprecision.com
SKU: HBS22951975761
Price: 23.99 USD
Availability: InStock
Rating: 3.5 (150 reviews)

Fischer 10x80 Concrete screw UltraCut FBS II ETA Approved (536860) 50 Pack

Fischer Concrete screw UltraCut FBS II ETA Approved

The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example.

Advantages

With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses.
The special saw tooth geometry enables fast cutting into the concrete.
Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.
Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings.
The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2.
The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again.
The checking gauge allows for reuse in temporary fixings (e.g. inclined supports) covered by the national approval.

Applications

Guard rails
Consoles/Base plates
Metal profiles
Shelving systems
Protection barriers
Results / beam anchors
Temporary anchoring, e.g. of building site equipment
Shuttering props
Reinforcement of bridges
Rehabilitation of old and ailing buildings
Rehabilitation of car parks

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked
Reinforcement of existing concrete structures

Also suitable for:

Concrete C12/15
Solid building materials
Masonry with a dense structure

You can find detailed information on building materials in the registration document.

Permission

ETA-15/0352
ETA-20/0321
DoP 0225
DoP 0227
DoP No. 0078
DoP No. 0146

Functionality

The UltraCut FBS II is recommended for the push-through installation.
Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.
We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive.
The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper

Technical Data

ETA-approval
DIBt-approval
Drill diameter d₀	10 [mm]
Min. drill hole depth for through fixings h₂	90 [mm]
Screw d_s x l_s	12 x 80 [mm]
Screw-in depth with fixture thickness h_nom1 / t_fix	55 / 25 [mm]
Screw-in depth with fixture thickness h_nom2 / t_fix	65 / 65 [mm]
Screw-in depth with fixture thickness h_nom3 / t_fix	— [mm]
Drive	SW 15
Packaging	Folding box
Amount	50 [pcs.]
GTIN (EAN-Code)	4048962251432